8
MODES OF OPERATION
CLOSED
OPEN
Ventilation lever
THERMOSTAT KNOB
Use to adjust the desired room temperature setting.
The air conditioner will automatically maintain the room temperature according to the
THERMOSTAT setting. The higher the numbers, the cooler the room temperature becomes.
Experiments may be needed in order to find out the most suitable setting.
AUTO SWING SWITCH
Use to activate automatic louvre movement during LOW COOL or HIGH COOL.
Adjust the louvres to change the direction of air flow for uniform and efficient cooling of the
room. Set the AUTO SWING switch ON ( ), and the Left/Right air flow adjustment louvres
will swing continuously to provide better circulation of cool air. The louvres will be stopped at
the position when the switch is turned off. You can also use the switch to adjust the Left/Right
air flow adjustment louvres to the desired position. Never attempt to move the Left/Right air
flow adjustment louvres manually, or manually force the louvre movement to stop during
swing operation.
The AUTO SWING switch will not activate the louvres when the SELECTOR KNOB is set to
LOW FAN or HIGH FAN.
UP/DOWN AIR FLOW ADJUSTMENT
Airflow direction can be adjusted by moving the airflow adjustment louvres upward or down-
ward. To avoid condensation on the louvres, please do not adjust them to the extreme down-
ward position during COOL operation mode for a long time.
VENTILATION LEVER
If air in your room is stale, set the VENTILATION lever to the RIGHT (OPEN) position. This
will remove stale air from the room. The VENTILATION lever should normally be kept in the
LEFT (CLOSED) position during cooling operation for maximum cooling effect.
Up/Down air flow
adjustment louvres
Left/Right air flow
adjustment louvres
(Auto Swing)
AF-A077J 2çZ-2
98.1.6, 0:11 PM
9
