The unit will turn off automatically according to your setting.
Timer duration can be set from minimum 0.5 hours (30 minutes) to maximum 12
hours.
Up to 9.5 hours, you can set by 0.5 hours (30 minutes) increments and from 10 to 12
hours, by 1 hour increment.
14
TIMER OPERATION
TIMER OFF
When the TIMER OFF is set, the temperature
setting is automatically adjusted to prevent
the room from becoming excessively hot or
too cold while you sleep. (Auto Sleep function)
1
COOL/DRY MODE:
One hour after the timer operation begins,
the temperature setting rises 1°C higher
than the original thermostat setting.
HEAT MODE:
One hour after the timer operation begins,
the temperature setting drops 3°C lower
than the original thermostat setting.
TIPS ABOUT TIMER OFF OPERATION
Point the remote control at the signal receiver win-
dow on the unit.
1
Press the TIMER OFF (
) button and set
time as desired.
• The time setting will change as you to press the
button as follows,
MODE
SAVE MODE
FAN
1H
SWING
FULL POWER
CANCEL
TEMP.
TEMP.
FAN
TIMER
0.5H
1.0H
1.5H
10H
11H
12H
Hold the button pressed down for fast setting.
• The yellow TIMER lamp on the unit will light up.
• The unit will generate a beep when it receives the
signal.
• The time setting will count down to show remain-
ing time.
TO CANCEL TIMER
Press the CANCEL button.
• The yellow
TIMER lamp
on the unit
will turn off.
SAVE MODE
FAN
1H
SWING
FULL POWER
CANCEL
TO CHANGE TIMER SETTING
Press the TIMER button which you wish to
change, (TIMER OFF or TIMER ON) and
change the time setting.
Example : When you wish to stop
the operation 2.5
hours later.
AY-XM09BEp/m
01.4.16, 3:45 PM
14
