Sharp AE-X26FR-N Operation Manual Download Page 3 | Manualshive

Page: 3 / 24

background image

E-1

• IMPORTANT SAFETY INSTRUCTIONS .. E-1
• PART NAMES ........................................... E-3
• SETTING DEODORANT DUST

COLLECTING FILTER .............................. E-5

• USING THE REMOTE CONTROL ........... E-6
• BASIC OPERATION ................................. E-8
• TIPS ABOUT INDICATOR PANEL ........... E-9
• ADJUSTING THE AIR FLOW DIRECTION ..... E-10
• PROGRESSIVE AIRFLOW ...................... E-11
• FULL POWER OPERATION .................... E-11

CONTENTS

• ONE-HOUR OFF TIMER ..................... E-12
• PLASMACLUSTER OPERATION ....... E-13
• SELF CLEAN OPERATION ................. E-13
• TIMER OPERATION ............................ E-14
• AUXILIARY MODE .............................. E-16
• MAINTENANCE ................................... E-16
• ADDITIONAL NOTES ON OPERATION ..... E-19
• TIPS ON SAVING ENERGY ................ E-19
• BEFORE CALLING FOR SERVICE .... E-20

WARNINGS FOR USE

1

Do not pull or deform the power supply cord. Pulling and misuse of the power supply cord
can result in damage to the unit and cause electrical shock.

2

Be careful not to expose your body directly to the outlet air for a long time. It may affect
your physical conditions.

3

When using the air conditioner for infants, children, elderly, bedridden, or disabled people
make sure the room temperature is suitable for those in the room.

4

Never insert objects into the unit. Inserting objects can result in injury due to the high
speed rotation of internal fans.

5

Ground the air conditioner without fail. Do not connect the grounding wire to gas pipe,
water pipe, lightning rod or telephone grounding wire. Incomplete grounding may cause
electric shock.

6

If anything is abnormal with the air conditioner (ex. a burning smell), stop the operation
immediately and turn the circuit breaker OFF.

7

The appliance shall be installed in accordance with national wiring regulations.

Improper

cable connection can cause the power supply cord, plug and the electrical outlet to
overheat and cause fire.

8

If the supply cord is damaged, it must be replaced by the manufacturer or its service agent
or a similarly qualified person in order to avoid a hazard. Use only the manufacture-
specified power cord for replacement.

WARNINGS FOR INSTALLATION / REMOVAL / REPAIR

• Do not attempt to install/remove/repair the unit by yourself. Incorrect work will cause electric

shock, water leak, fire etc. Consult your dealer or other qualified service personnel for the
installation/removal/repair of the unit.

This equipment complies with the requirements of Directives 89/336/EEC and 73/23/
EEC as amended by 93/68/EEC.

IMPORTANT SAFETY INSTRUCTIONS

AY-XP26FR-N_Eng.p65

05.9.1, 2:04 PM

3

«
1
2
3
4
5
...
»

Summary of Contents for AE-X26FR-N

























Reviews:

No comments

Related manuals for AE-X26FR-N

Brand: Haier Pages: 21

Brand: Haier Pages: 182

Brand: Haier Pages: 27

Brand: Haier Pages: 30

Brand: Haier Pages: 182

Brand: d2itsu Pages: 20

Brand: Panasonic Pages: 145

Brand: Panasonic Pages: 76

Brand: Panasonic Pages: 56

U LIGHT COMBO TRS2075

Brand: IconBiT Pages: 2

Brand: Seifert Pages: 19

Brand: Perfect Aire Pages: 12

Brand: GreenTec Pages: 36

Brand: Olmo Pages: 37

Brand: teca Pages: 9

Brand: TCL Pages: 33

Brand: Kelvinator Pages: 24

Brand: Cellartec Pages: 35

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands