E-10
ADJUSTING THE AIR FLOW DIRECTION
VERTICAL AIR FLOW DIRECTION
HOW TO ADJUST THE AIR FLOW DIRECTION
HEAT mode
COOL and DRY modes
The adjustment range is narrower the
SWING range in order to prevent con-
densation from dripping.
The range is wide so the air flow can be
directed toward the floor.
Hold the horizontal adjustment
louvre as shown in the diagram
and adjust the air flow direction.
Press the SWING button on the remote control once.
• The vertical adjustment louvre will change its angle continuously.
Press the SWING button again when the vertical adjustment louvre is at the
desired position.
• The louvre will stop moving within the range shown in the diagram.
• The adjusted position will be memorized and will be automatically set to the same position
when operated the next time.
Adjustment range
CAUTION
Never attempt to adjust the vertical adjustment louvres manually.
• Manual adjustment of the vertical adjustment louvre can cause the unit to malfunction when the
remote control is used for adjustment.
• When the vertical adjustment louvre is positioned at the lowest position in the COOL or DRY mode
for an extended period of time, condensation may result.
Do not adjust the horizontal adjustment louvre to the extreme left or right in the COOL mode
with the fan speed set to "SOFT(
)" for an extended period of time.
Condensation may form on the louvres.
HORIZONTAL AIR FLOW DIRECTION
Floor standing
Ceiling suspended
Floor standing
Ceiling suspended
Floor standing
Ceiling suspended
GS-XP07FR_Eng.p65
05.4.1, 4:42 PM
12
