background image

ENGLISH

29

21

28

18

10

0

34

(¡C)

(¡C)

Cool

(24¡C)

Fan

Cool

(25¡C)

Heat

(22¡C)

Dry

(

)

Heat

(23¡C)

Heat

(24¡C)

Cool

(26¡C)

outdoor

temp.

indoor temp.

Room Temp.

-2¡C

ECO

ECO

E-9

During operation, if the outdoor temperature changes, the temperature settings will automati-
cally slide as shown in the chart.

MODE CHANGEOVER

During seasons when you need COOLING at daytime and HEATING at night, or if the room
temperature should become extremely higher than the temperature setting, due to supplemen-
tary heating equipment, the mode will automatically switch between HEAT and COOL mode to
keep the comfortable room temperature.

TIPS ABOUT AUTO MODE

In the AUTO mode, the temperature setting and mode are automatically selected according to
the room temperature and outdoor temperature when the unit is turned on.

Modes and Temperature Settings

TIPS ABOUT INDICATOR PANEL

The indicator panel will change each time you press
the DISPLAY button in the following manner.

The room temperature and
POWER MONITOR are displayed.

The outdoor temperature and
POWER MONITOR are displayed.

No display.

POWER MONITOR

When the room temperature or the outdoor temperature is displayed, the POWER MONITOR
will light up in 4 levels for COOL and HEAT modes (3 levels for DRY mode), to indicate the
operation power. When the air conditioner is operating at maximum power in the COOL and
HEAT modes, "Power" will light and "Eco" will turn off on the indicator panel.

NOTES:

• The displayed temperatures are rough estimates and may vary from the actual temperatures.
• Temperature display ranges

Room temperature: 0°C ~ 40°C ( 

 is displayed when less than 0°C and 

 when higher

than 40°C)
Outdoor temperature: -9°C ~ 45°C ( 

 is displayed when less than -9°C and 

 when higher

than 45°C)

  is displayed during the first 90 seconds of operation while the temperatures are being

detected.

• Only the room temperature can be displayed for 5 seconds when the unit is not in operation.

Room Temp.

Lamp

Temperature

Indicator

POWER MONITOR

Outdoor Temp.

Lamp

DISPLAY

FULL

POWER

the figures in (  ) are temperature settings

Summary of Contents for AE-X08BE-C

























Reviews: