E-14
CLEANING THE UNIT AND THE REMOTE CONTROL
Be sure to disconnect the power cord from the wall outlet or turn off the circuit
breaker before performing any maintenance.
MAINTENANCE AFTER AIR
CONDITIONER SEASON
1
Operate the unit in the COOL mode,
temperature setting 32°C, for about
half a day to allow the mechanism to
thoroughly dry.
2
Stop the operation and unplug the unit.
Turn off the circuit breaker.
3
Clean the filters, then reinstall them.
MAINTENANCE BEFORE
AIR CONDITIONER SEASON
1
Make sure that the air filters are not
dirty.
2
Make sure that nothing obstructs the
air inlet or outlet.
3
Check the outdoor mounting rack pe-
riodically for wear and to make sure
it is firmly in place.
• Wipe them with a soft cloth.
• Do not directly splash or pour water on them, or it can cause electrical shock or equipment
damage.
• Do not use hot water, thinner, abrasive powders or strong solvents.
MAINTENANCE
CLEANING THE FILTERS
The air filters should be cleaned every two weeks.
1
TURN OFF THE UNIT
2
REMOVE THE FILTERS
1 Lift the open panel.
2 Push the air filters up slightly to unlock them.
3 Pull the air filters down to remove them.
3
CLEAN THE FILTERS
Use a vacuum cleaner to remove dust. If the
filters are dirty, wash them with warm water and a
mild detergent. Dry filters in the shade before
reinstalling.
4
REINSTALL THE FILTERS
1 Reinstall the filters in the original positions.
2 Close the open panel.
3 Push the arrow-marked points shown left firmly
to lock it in place.
OPTION KIT
Air Purifying Filter
During operation of the air conditioner, the air purifying filter removes dust and
tobacco smoke from the air and discharges clean air.
The apatite antibacterial material used in the air purifying filter suppresses
activities of adsorbed viruses and other germs.
The replacement period for the disposable type is approximately 3~6 months.
Contact your dealer for the purchase of this option.
Type AZ-F1800C
1
2
3
2
3
1