Sharp 8M-B32C1, Operation Manual

Page: 32 / 36

32
E
Specifications
n
Product Specifications
Model 8M-B32C1
LCD component 32" Class [31-1/2 inch (80.0cm) diagonal] TFT LCD
Max. resolution (pixels) 7680 x 4320
Max. colors Approx. 1.07 billion colors
Pixel pitch 0.091 mm (H) x 0.091 mm (V)
Brightness (typical) Full screen white: 800 cd/m 2 , Peak: 1000 cd/m 2 *1
Contrast ratio (typical) *
1
1000000 : 1
*2
Viewing angle 176 ° right/left/up/down (contrast ratio ≥ 10)
Screen active area inch (mm) 27-7/16 (W) x 15-7/16 (H) (697.7 x 392.5)
Ratio of effective pixel * 3 99.9999% or more
Plug and play VESA DDC2B
Computer input signal DisplayPort 1.2
Input terminals Video
HDMI1 (8K-compliant, HDR (HLG/PQ)-compliant, HDMI x 1) x 1
HDMI2 (8K-compliant, HDR (HLG/PQ)-compliant, HDMI x 4) x 1
HDMI3 (4K-compliant) x 1
DisplayPort (4K-compliant) x 1
Output terminals Audio 3.5 mm mini stereo jack x 1
USB port B type x 1
Power requirement AC 100 V - 240 V, 2.9 A, 50/60 Hz
Operating temperature *
4
41°F to 95°F (5°C to 35°C)
Operating humidity 20% to 80% (no condensation)
Power consumption
(Input signal waiting state *
5
/ Standby mode /
Off mode)
260W
(25W / 0.5W / 0.0W)
Dimensions (excluding protrusions) inch (mm) With the stand
Approx. 29-9/16 (W) x 10-1/4 (D) x 21-1/4 (H) (751 x 260 x 540)
Without the stand
Approx. 29-9/16 (W) x 3-7/8 (D) x 18-7/16 (H) (751 x 99 x 469)
Weight lbs. (kg) Approx. 29.4 (13.3) (monitor only)
Approx. 42.4 (19.2) (with the stand attached)
*1 Brightness and contrast ratio will depend on input mode and other picture settings. Brightness level will decrease over time. Due to the
nature of the equipment, it is not possible to precisely maintain a constant level of brightness.
*2 When DYNAMIC RANGE EXPAND is set to MODE2 or MODE3.
*3 Even though the LCD panel of this product is manufactured with high precision, there may be ineffective pixels such as ones which
never lights up or always lighting up. “Ratio of effective pixel” means the ratio of the number of effective pixel (subtracting the number of
ineffective pixels from the whole number of pixels) against the whole number of pixels on the LCD panel. Please note that presence of
ineffective pixels does not mean failure of LCD panel.
*4 Temperature condition may change when using the monitor together with the optional equipments recommended by SHARP. In such
cases, please check the temperature condition specified by the optional equipments.
*5 When NO SIGNAL AUTO INPUT SEL. is set to OFF.
As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement
without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from
these values in individual units.