Sharp 70DS-01FP, Service Manual

Page: 2 / 33

70DS-01FP
2
ELECTRICAL SPECIFICATIONS
Power Input .........................220V-240 Volts AC 50Hz
Power Consumption ............................................99W
Audio Power Output Rating.................4.5 (M.P.O.)x2
Speaker...................................................6cm X 13cm
Voice Coil Impedance........................7ohms x 2 units
Convergence.......................Self Converging System
Focus..................................Bi-Potencial Electrostatic
Sweep Deflection.........................................Magnetic
Intermediate Frecuencies
Aerial Input Impedance
Tuning Ranges
•
Intermediate Frecuencies
•
Colour Sub-Carrier Frequencies
•
Sound IF Carrier Frequencies
L’(VHF-L).............................................33.9MHz
L(VHF-H, UHF)B/G.............................38.9MHz
L’(VHF-L).............................................40.4MHz
L(VHF-H, UHF)............................33.5/32.4MHz
B/G..............................33.05/33.158/34.47MHz
SECAM L’..........................38.15/38.30625MHz
SECAM L, B/G..................34.65/34.49375MHz
PAL B/G.............................................34.47MHz
VHF/UHF...........................75 ohm Unbalanced
L/L’.........................55.75MHz thru 855.25 MHz
CATV Special Channels
B/G........................48.25MHz thru 855.25 MHz
Specifictions are subject to change without
prior notice.
WARNING
The chassis in this receiver is partially hot. Use an isolation transformer between the line
cord plug and power receptable, when servicing this chassis.
To prevent electric shock, do not remove cover. No user-serviceable parts inside. Refer
servicing to qualified sercice personnel.