Sharp 679 User Manual Download Page 168

Page: 168 / 219

Action

Yes

Check if the printer is using a genuine and supported toner
cartridge.

Note:

If the cartridge is not supported, then install a

supported one.

Print the document.

Do horizontal light bands appear on prints?

Contact your

dealer

. The problem is

solved.

Incorrect margins

Note:

Before solving the problem, print the Print Quality Test Pages. From the control panel, navigate to

Settings

Troubleshooting

Print Quality Test Pages

. For non-touch-screen printer models, press

navigate through the settings.

Action

Yes

Step 1

Adjust the paper guides to the correct position for the paper
loaded.

Print the document.

Are the margins correct?

The problem is
solved.

Go to step 2.

Step 2

Depending on your operating system, specify the paper size
from the Printing Preferences or Print dialog.

Notes:

•

Make sure that the setting matches the paper loaded.

•

You can also change the setting from the printer control
panel. Navigate to

Settings

Paper

Tray Conﬁguration

Paper Size/Type

Print the document.

Are the margins correct?

The problem is
solved.

Contact your

dealer

Troubleshooting

168

Summary of Contents for 679




























































































































































































































Search results

Summary of Contents for 679

Reviews:

Related manuals for 679

Brands by name

Popular brands

Sharp 679, User Manual

Search results

Summary of Contents for 679

Reviews:

Related manuals for 679

Brands by name

Popular brands