Sharp 60005523, Operation Manual

Page: 15 / 37

15
E
Caution
• Use only the power cord supplied with the monitor.
1. Turn off the main power switch.
2. Plug the power cord (supplied) into the AC input
terminal.
3. Plug the power cord (supplied) into the power outlet.
Preparing the Remote Control Unit
Remote control operation range
The operation range of the remote control unit (PN-ZR02,
optional) is approx. 16.4 feet (5 m) at an angle of approx.
10° from the center to the top/bottom/right/left of the remote
control sensor.
10° 10°
10°
10°
Remote control sensor
16.4
feet
(5 m)
TIPS
• Do not expose the remote control unit to shock by dropping
or stepping on it. This could lead to a malfunction.
• Do not expose the remote control unit to liquids, and do not
place it in an area with high humidity.
• The remote control unit may not work properly if the remote
control sensor is under direct sunlight or strong lighting.
• Objects between the remote control unit and the remote
control sensor may prevent proper operation.
• Replace the batteries when they run low as this may
shorten the remote control’s operation range.
• If a fluorescent light is illuminated near the remote control
unit, it may interfere with proper operation.
• Do not use it with the remote control of other equipment
such as air conditioner, stereo components, etc.
Installing the batteries
1. Place your finger on the part marked with the ▲, and
then pull the cover off.
2. See the instructions in the compartment and put in the
batteries (supplied with the PN-ZR02 (optional)) with
their plus (+) and minus (-) sides oriented correctly.
3. Close the cover.
TIPS
• When the batteries become exhausted, replace them with
new (commercially available) batteries.
• Use manganese (R03 (“AAA” size)) or alkaline (LR03
(“AAA” size)) batteries only.
• The supplied batteries may become exhausted quickly
depending on how they are stored.
• If you will not be using the remote control for a long time,
remove the batteries.
Connecting the Power Cord
Main power switch
1
AC input terminal
2
Power cord
(Supplied)
For power outlet
3
1