3
54GT-25S
ELECTRICAL SPECIFICATIONS
•
Power Input .......................220V-240 Volts AC 50Hz
•
Power Consumption
•
Audio Power Output Rating .....................4W (MPO)
Speaker..........................16
Ω
4W, 10cm Round, 1pc
Normal Operation....................................52W
Stand-by Operation.................................7.0W
•
White Level
Set the brightness control, with no signal connected, so that the CRT cathode current is 600mA. The maximum
correction applied to each cathode current to achieve a screen temperature of 8950 degrees K-20 MPCD should
not exceed 15% of its original value.
X=0.290 Y=0.300
WARNING
The chassis in this receiver is partially live, always use an isolation transformer when
servicing this chassis.
To prevent electric shock, do not remove cover. No user-serviceable parts inside. Refer
servicing to qualified service personnel.
Convergence.........................Self Converging System
Focus....................................Bi-Potencial Electrostatic
Sweep Deflection...........................................Magnetic
Specifications are subject to change without prior notice.
•
Aerial Input Impedance
VHF/UHF...........................75 ohm Unbalanced
•
Tuning Ranges ............48.25MHz thru 855.25 MHz
VHF.............CH02-CH12, S1-S41
UHF.............CH21-CH69
•
Picture Intermediate Frecuency.....
.........38.9MHz
•
Sound Carrier Trap
.............................33.4MHz
•
Adjacent Sound Carrier Trap
................40.4MHz
•
Adjacent Picture Carrier Trap
...............31.9MHz
