EN -10-
CHAPTER -5: DOOR REVERSAL
Repositioning the door
•
It depends on which fridge you have as to whether it is possible the reverse the door.
•
It is not possible where handle is attached at the front of the appliance.
•
If your model does not have handles it is possible to reverse the door, but this needs to be completed by
authorised personnel. Please call Sharp service.
CHAPTER -6: TROUBLESHOOTING
If your refrigerator is not working properly,it may be a minor problem, therefore check the following, before calling an
electrician to save time and money.
What to do if your refrigerator does not operate ;
Check that ;
•
There is no power,
•
The general switch in your home is not disconnected ,
• The thermostat setting is on «•» position,
• The socket is not sufficient. To check this, plug in another appliance that you know which is working into the
same socket.
What to do if your refrigerator performs poorly ;
Check that ;
•
You have not overloaded the appliance ,
•
The doors are closed perfectly ,
•
There is no dust on the condenser ,
•
There is enough place at the rear and side walls.
Your fridge freezer is too noisy.
The cooling gas which circulates in the refrigerator circuit may make a slight noise(bubbling sound) even when the
compressor is not running. Do not worry this is quite normal. If these sounds are different check that ;
The appliance is well levelled ,
Nothing is touching the rear.
If there is water in the lower part of the refrigerator ;
Check that ;
The drain hole for defrost water is not clogged insert a space please (Use defrost drain plug to clean the drain hole)
Recommendations
•
If you will not use your fridge for a long time (e.g. in summer holidays) unplug it. Clean your fridge according to
chapter cleaning and leave the door open to prevent humidity and smell.
•
If the problem persists after you have followed all the instructions above, please consult an authorised service
provider.
CHAPTER -7: TIPS FOR SAVING ENERGY
1.
Always allow foodstuffs to cool before storing in the appliance.
2. Thaw food in the fridge compartment, this helps save energy.
CHAPTER -8: INFORMATION FOR TEST INSTITUTES
Appliances
for EcoDesign verification should be compliant with EN 62552.
Ventilation requirements, recess dimensions and minimum rear clearances shall be as stated in this User Manual in
Chapter 2. Please contact the manufacturer for any other further information, including loading plans.
