Sharp 34N-WF5H, Service Manual

Page: 10 / 87

10
34N-WF5H
DRESSING THE LEADS
Earth
GS
SH
GS
SH
Tightening torque:
1.17
±
0.19 N-m
(12
±
2 kg-cm)
Connect M.
Bundle M and EW.
Insert GS.
Connect K.
Bundle K.
Insert EW
×
2
Insert EW
Insert NS.
Bundle K, GS, EW and NS.
Insert the PWB
(until securely locked).
Insert GS and dress
the leads with no
slack. Fold back and
bundle the leads.
Insert SH.
Connect M.
(Keep the M leads tight.)
Couple the speaker
connectors
(for both sides).
Couple the speaker
connectors
(for both sides).
Dress the speaker leads
(for both sides).
Catch them at the hooks indicated.
Dress the speaker leads
(for both sides).
Catch them at the hooks
indicated.
Connect
the coating ground lead
(2 points).
Connect Pu.
Remove the pin cover
and fit the CRT PWB.
Connect the anode
(after connecting the
coating ground lead).
Anode clamp: LHLDW1087CEKZ x2
Reposition the anode clamp.
Keep the CRT and other leads
10 mm or more away
from the anode lead.
Bundle the K and
anode leads.
Secure the CA leads
at 2 spots.
Secure the AC cord at 2 spots.
Place the core between
the two wire holders.
Insert the AC cord holder (LHLDK0014PEZZ)
into the indicated recess.
Speaker boxe:RSP-Z0109CEZZ x2
Place the speaker boxes in
position and tighten the 4 screws.
Screw:LX-TZ3096CEFD
×
4
The wider side is the
positive terminal. Do not
confuse the right and left
speakers. Their polarities
are different from each
other.
Pu/Mg
Screw
Screw
å
å
å
å
å