2T-C45AE1X
5 – 13
11.INPUT MODE START
•
•
•
•
12.INPUT MODE FIXED
-
•
•
•
• With the execution of hotel mode, the input source is forced to change to that set by “ inupt mode
starts” and the channel switching and input switching are prohibited there after.
Variable
: When “ INPUT MODE START ” is active, it impossible to switch to anothe channel
or input.
• The following keys are invalidated.
CH
,
*
However, the keys ( input switching and CH keys ) of the unit for menu operation remain valid.
•
13. 232C POWON
•
•
DISABLE
14. PICTURE IMPORT
RS-232 power ON command “ POWR̲̲̲
"
•
•
15.START UP SCREEN
•
•
•
-
-
-
•
• 1
~
180
•
•
•
None
Selection
Default
Explanation
About option
Limit in setting
Exception
Remarks
Selection between “ Normal ” or “ input source 1 ( input seelction or channel )” . ( loop provide.
Normal
In power-ON, the input source to be started or channel can be set.
( In standard mode, the operation follows the last memory )
All the input source in the model are made selectable.
When the input/output switchable input source is selcted and the input source is set to output, the setting of
inpit/output switching is changed to input at the execution of hotel menu. In addition, the input/output
switching by menu is prohibited.
In TV mode, the display of all channels is stopped and it is treated as an input source. At this time, the channel
to be set follows the last memory and the content of the last memory is included in the natation by
option. Ex.) TV ( CH2 ), TV ( CH4 ) etc.
The order of appearance of option in the hotelmenu should agree with order toggles by input swithcing key.
. The display of channel setting menu and the channel setting operation are prohibited ( except for MCL )
In setting at “ Normal ”, the setting of “ input modefixed ” is changed to “ Variable ” and selection should
be prohibited.
Selection
Default
Explanation
Limit in setting
Exception
Remarks
Selection between “ Variable ” and “ Fixed “ ( loop provide )
( Variable )
: If [ INPUT MODE START ] is set to normal, input mode is not fixed.
Fixed
direct tuning button, FLASHBACk, input
None
In the following case, setting is cancelled and mode is changed to “ Variable ”.
1) When the setting of “ input mode start ” is set to “ Stardand ( Normal )”.
Selection
Default
Explanation
Limit in setting
Exception
Remarks
“ Enable ” and “ Disable ”
Disable
The item decide whether Power ON by the 232C command is enable /disabled in the standby state.
ENABLE
: POWR0001is always enabled.
: Start-up may be impossible at POWR0001.
( if the 232C command reception module is set to OFF, the command is invalid).
None
None
Option
Default
Explanation
Limit in setting
Exception
Remarks
“ Off ” or “ On ” ( loop enabled )
Off
To imported picturefrom USB and strored to TV’s flash memory.
None
None
If “ PUBLIC.JPEG ”name file under 4Mn in USB memory. A imported picture is stored to TV’s flash memory. then display “OK”
If “ PUBLIC.JPEG ” name file over 4Mb in USB memory. Don’t import picture. And TV’s flash does not change. Then display “ ERR ”
If “ PUBLIC.JPEG ” name file ob in USB memory or no “ PUBLIC. JPEG ” file in USB memory, TV’s flash memory erase. Then dispaly “DEL”
If remove USB memory before finished stored image, don’t import picture. And TV’s flash does not change, Then display “ERR”
If no insert USB memory, don’t import picture. And TV’s flash memory does not change. the dispaly “ ERR ”.
Option
Default
Explanation
Remarks
“ Off ”, “ 1 ~ 180” ( loop enabled )
Off
Off
: Cannot setup picture display time.
: To make user can setup picture display time. The range is 1 second to 180 seconds.
If “ START UP SCREEN ” item is 1 ~ 180.
When Tv power ON from deep standby, power off or AC off mode, TV needs to display PUBLIC picture for setting time
When TV power ON from standby mode, TV needn’t to display PUBLIC picture.
When displaying PUBLIC picture, a ket input :
Input key is RC Power key : TV change to standby mode.
Input key is panel Power key : TV change to power off mode.
Other keys ( RC/ Panel ): No operation
4 - 18
