Sharp 29H-S3P, Operation Manual

Page: 15 / 67

E 14
1
When the inset screen (PIP)
is displayed, press
TV/VIDEO
.
• The input for the inset screen
changes in the following order.
2
When the inset screen (PIP) is displayed, press
PIP-CH
'
/
"
to
select the desired channel for the inset screen.
• If main screen is TV channel.
• If main screen is AV channel.
Input/channel selection of inset screen
AV1
(SAV1)
AV3
(SAV3)
TV
(Current viewing channel)
(AV2)*
( A V 1 )
5
* The inset screen (PIP) does not display the signal input via
Component-in terminal. (AV2 will not appeared.)
• When main screen is TV channel, inset screen can only show the
main screen TV channel and other AV inputs by pressing
PIP-CH
'
/
"
.
1
When the inset screen (PIP)
is displayed, press
SWAP
.
• The inset screen changes over
with the main screen.
2
Press
FREEZE
.
• The inset screen displays a still
picture.
• If
SWAP
is pressed during
Freeze mode, the Freeze
function is cancelled and the
inset screen changes over with
the main screen.
Swap/Freeze
FREEZE
SWAP
PIP-CH
'
/
"
TV/VIDEO
( A V 1 )
5
( 5 )
1 V A
3
Press
FREEZE
again to cancel Freeze mode.
AV1
(SAV1)
AV3
(SAV3)
TV channels
(AV2)*
AV1
(SAV1)
AV3
(SAV3)
TV
(Current viewing channel)
(AV2)*
29H-S3P(11-20)EN 15/3/05, 12:23 PM 14