Sharp 29H-F200RU, Operation Manual

Page: 26 / 48

E 26
Picture adjustment
1
Press
MENU
to call MENU
screen.
2
Press
'
/
"
to select
“PICTURE”.
6
Repeat steps 4 and 5 above to adjust other items.
7
Press MENU until normal screen appears.
• When NORMAL is pressed while the PICTURE menu is displayed,
the setting for the selected item is reset to the standard (factory
setting) position.
• When NORMAL is pressed while the MENU screen is displayed and
“PICTURE” is selected, all the settings for the PICTURE items are
reset to the standard (factory setting) position.
3
Press ENTER to display
PICTURE menu.
4
Press
'
/
"
to select adjustment
items.
5
Adjust using
\
/
|
.
The following table lists the adjustment items shown in the PICTURE menu and how they change as you
press
\
/
|
.
*-1: TINT can only be selected and adjusted when receiving an NTSC signal.
*-2: Picture Noise Reduction
Noise might be generated on images when playing deteriorated video tapes or when receiving broadcasts with
relatively weak signals. In these cases, set PICTURE NR to “LOW, MID or HIGH” to reduce the noise. However,
when receiving good images without noise, you can get better image quality by turning OFF this feature.
MENU
P I CTURE
SOUND
FEATURE
T I MER
CH–SETT I NG
( STANDARD
CONTRAS
P I CTURE
T 50
)
COLOUR 0
BR I GHTNESS 0
T I NT
SHARPNESS
0
P I CTURE NR LOW
WH I TE TEMP 0
R
( STANDARD
CONTRAS
P I CTURE
T 30
)
COLOU 0
B 0
P I CTURE NR
WH I TE TEMP 0
CH : SELECT : ADJUST MENU : RETURN
CONTRAST
Selected item Press
\
Press
|
COLOUR
BRIGHTNESS
TINT -1
SHARPNESS
PICTURE NR -2
To decrease
contrast
For less colour
intensity
For less
brightness
To move tint toward
purple
For less
sharpness To increase
contrast
For more colour
intensity
For more
brightness
To move tint toward
green
For more
sharpness
(See note below)
WHITE TEMP To more reddish
background To more bluish
background
OFF LOW
MID
HIGH
Adjustable individually for each AV mode
Settings and adjustments
29H-F200RU(20-29)EN 11/6/04, 3:42 PM 26