8
Dimension: 140mm x 215mm
Quick Reference Control Operation
•
Part Names
Quick Reference Control Operation (Continued)
Note:
• The
LIGHT
button on the Remote Control glows in the dark. To use the glow-in-the-dark display on the remote control, place
it under a fluorescent light or other lighting.
• When the
LIGHT
button is pressed, the shaded buttons above will light up.
• Using the
LIGHT
button frequently will shorten the battery life.
• Alkaline batteries are recommended for frequent use of the
LIGHT
button.
• The phosphorescent material contains no radioactive or toxic material, so it is safe to use.
• The degree of illumination will vary depending on the strength of lighting used.
• The degree of illumination will decrease with time and depending on the temperature.
• The time needed to charge the phosphorescent display will vary depending on the surrounding lighting.
• Sunlight and fluorescent lighting are the most effective when charging the display.
Basic Remote Control Functions
POWER
Press
→
On.
Press again
→
Off.
REMOTE KEYPAD
Accesses any channel from keypad.
FLASHBACK
Returns to previous channel.
PERSONAL PREFERENCE
With the Personal Preference buttons,
you can program your favorite
programs by using the 4 categories A,
B, C and D. The channels can be
accessed quickly by using these
buttons. (See page 33.)
VOLUME UP/DOWN
(
k
) Increases sound.
(
l
) Decreases sound.
•
Changes or selects the TV
adjustments on On-Screen Display.
MENU
Press
→
Accesses MAIN MENU.
Press again
→
Exits MAIN MENU.
MUTE
Press
→
Mutes sound.
Press again
→
Restores sound.
•
When sound is muted, CLOSED
CAPTION appears if available.
POWER (DVD/VCR)
Press
→
On.
Press again
→
Off.
DVD/VCR CONTROL
(See page 42.)
Infrared Transmitter Window
CATV/DVD-TV/VCR MODE buttons
Press TV/VCR
→
Signals sent will be for
TV and VCR control.
Press CATV/DVD
→
Signals sent will be
for cable TV converter and DVD control.
DISPLAY
Press
→
Displays receiving channel for
4 seconds.
Press again
→
Removes display.
•
Temporarily displays receiving
channel when in Closed Caption
mode.
INPUT
Press
→
Switches to external video
INPUT 1 mode.
Press twice
→
Switches to external video
INPUT 2 mode.
Press 3 times
→
Switches to external
video INPUT 3 mode or COMPONENT
mode.
Press 4 times
→
Switches back to the
original TV mode. (See page 40.)
ENTER
Used in some instances where a Cable
Converter Box requires an “enter”
command after selecting channels, when
using the REMOTE KEYPAD button.
(See page 42.)
CHANNEL UP/DOWN
(
a
) Selects next higher channel.
(
s
) Selects next lower channel.
•
See pages 29–31 for Channel Setting.
•
Moves the “
E
” mark on the MENU
screen
SKIP/VCR-CH
(See page 42.)
REC
(See page 42.)
LIGHT
Press
→
All the shaded operation buttons
will light up. At the same time, the selected
MODE button, either CATV/DVD or TV/
VCR will flash.
27/32F640(07-08)
03.10.8, 9:23 AM
8
