Sharp 21LF-90H, Operation Manual

Page: 17 / 35

- 16 -
ground becomes " BLUE ". To stop the
search process “ ” or “ ” button must be
pressed again.
Selecting Fine Tuning
You can use the Fine Tuning process for
fine adjustment (after coarse adjustment), if
you are not happy about the image on the
screen.
Use “ ” or “ ” button on FINE TUNING item,
until getting the best image on the screen.
In Channel option, normally the Fine Tuning
cursor is placed at the middle on the slider,
and this is indicated with the two reciprocal
arrows.
To Store Settings
Press “ ” or “ ” button on STORE option to
store Install menu settings.
Programme Menu
• To enter Programme menu directly, press
the " " button, or
• Press “ M ” button, now you are in Main
menu. In the Main menu, select “ PRO-
GRAM. ” using “ ” or “ ” button. Then en-
ter the Programme menu pressing “ ” or
“ ” button.
Moving cursor to four direction you can reach
30 programmes in the same page. By
scrolling the pages up or down by pressing
the navigation buttons you can select all the
programmes in TV mode (except the AV
mode).
In menus, “ ” and “ ” buttons are working
like "Direction Up" and "Direction Down".
By cursor action, programme selection is
done automatically. Selected programme is
displayed with
“CYAN” characters. In order
to select programme is also possible by us-
ing digit or double-digit button. In this way
programme selection gets also automati-
cally and after selection the selected pro-
gramme is displayed with cyan characters.
The TV Status is changed by the program-
me selection too. When using double-digit
button in order to select a programme, the
Programme Number in TV Status OSD is
displayed in "
P -- " form, and by pressing
digit buttons they are displayed in it.
Programme Number is between 00 and 99.
Programme Name has a name string with 5
characters. After autostore process the Pro-
gramme Names are set to:
• " PR01 " (programme number).
At the bottom of the menu there is a pro-
gramme sort functions section. Each func-
tion is activated by color button (seen
above).
NAME allows changing the pro-
gramme name. By DELETE you can delete
programmes that you decided. INSERT sec-
tion is for inserting programmes into an-
other programme spaces. By selecting
AU-
TOSTORE section, Autostore menu will be
available.
To change the name of a decided program-
me, that programme is selected and
pressed to the
RED button ( NAME ). The first
letter begins to blink on the selected name.
To change that letter “
” or “ ” button can
be used, and to select the other letters, “ ”
or “ ” button can be used. If the cursor is at
the last letter of the Programme Name,
pressing “ ” button moves the cursor at the
beginning. On the contrary, if the cursor is at
the beginning of the Programme Name,
pressing “ ” button moves the cursor at the
end.
ENG-2163-1548 UK-PAL-TEK SCART-FAV-STEREO-SHARP-AK44-TV1.p65 06.01.2004, 15:37 16
Downloaded from: http://www.usersmanualguide.com/