Picture or Sound adjustment
The following table lists the adjustment items shown in the PICTURE/SOUND menu and
how they change as you press
/
.
*: TINT can only be selected and adjusted when receiving NTSC broadcasts.
• Auto Noise Reduction (ANR)
Noise might be generated on images when playing deteriorated video tapes or when
receiving broadcasts with relatively weak signals. In these cases, set ANR to “ON ” or
“ON ” to reduce the noise. However, when receiving good images without noise, you
can get better image quality by turning OFF this feature. If ON is selected and the
image is still with noise, please switch to ON .
• WHITE TEMP can only be adjusted on PICTURE menu.
• The CONTRAST, COLOUR, BRIGHTNESS, TINT, SHARPNESS and WHITE TEMP
setting can be set differently for individual AV Mode setting.
TV/VIDEO
TV
0
4
7
2
8
3
6
9
CH
CH
1
5
MENU
SURROUND
LANGUAGE
NORMAL
CH
CH
MENU
NORMAL
CONTRAST
AV MODE
Selected item
Press
Press
COLOUR
BRIGHTNESS
TINT
SHARPNESS
To decrease contrast
For less colour intensity
For less brightness
To move tint toward red
For less sharpness
To increase contrast
For more colour intensity
For more brightness
To move tint toward green
For more sharpness
- +
- +
- +
- +
WHITE TEMP
To more reddish
background
To more bluish background
ANR
(See note below)
DYNAMIC
SOFT
STANDARD
ON
ON
OFF
!
Press
MENU
to call MENU screen.
@
Press
CH
/
CH
to select “PICTURE” or “SOUND”.
#
Press
/
to display PICTURE or SOUND menu.
$
Press
CH
/
CH
to select adjustment items.
%
Adjust using
/
.
• Wait for approximately three seconds to return to PICTURE/SOUND menu.
^
Repeat steps 4 and 5 above to adjust other items.
&
Press
MENU
until normal screen appears.
SURROUND
ON
ON
TREBLE
BASS
To decrease treble
To decrease bass
To increase treble
To increase bass
- +
- +
BALANCE
To shift balance
toward left
To shift balance toward right
OFF
Selected item
Press
Press
AV MODE
DYNAMIC
SOFT
STANDARD
PICTURE
SOUND
FEATURE
TIMER
CH-SETTING
AV MODE
DYNAMIC
SURROUND
ON
TREBLE
+10
BASS
–20
BALANCE
20
TREBLE
+10
-
+
OFF
0:00
OFF
0:01
OFF
0:02
OFF
0:03
OFF
0:04
OFF
0:05
F l a s h i n g
!
Press
MENU
to call MENU screen.
@
Press
CH
/
CH
to select “TIMER”.
#
Press
/
to display TIMER menu.
$
Press
CH
/
CH
to select “OFF
”.
%
Press
/
to set time for TV to turn
off.
• Maximum time that can be preset is 12 hours and 50
minutes. Timer start to count down after setting.
^
Press
MENU
until normal screen appears.
• Five minutes before the preset length of time expires, the remaining time
appears on the screen.
• A flashing display of the remaining time appears during the last few seconds.
When the preset length of time has passed, the TV set enters the Standby
mode.
Off timer
Automatically turns power off after a set length of time has passed.
!
Repeat step 1 to 3 of OFF TIMER.
@
Press
CH
/
CH
to select “ON
”.
#
Press
/
to set time for TV to turn
on.
• Maximum time that can be preset is 12 hours and 50
minutes. Timer start to count down after setting.
$
Press
CH
/
CH
to select “POSITION”.
%
Press
/
to set the channel.
^
Repeat step 4 to 5 above to select and set the
“VOLUME”.
&
Press
MENU
until normal screen appears.
*
Press
to put TV set into Standby mode.
• Power indicator will flash to indicate On Timer is set.
• When the preset length of time setting has passed, the power turns on and a
picture appears on the screen.
• The ON TIMER speaker volume gradually increases from zero to preset
volume.
On timer
Automatically turns power on after a set length of time has passed.
TV/VIDEO
TV
0
4
7
2
8
3
6
9
CH
CH
1
5
MENU
SURROUND
LANGUAGE
NORMAL
CH
CH
MENU
[ TV Set (Bottom) ]
Power indicator
(Flashing)
OFF
--:--
ON
8:00
POSITION
--
VOLUME
--
--:--
OFF
--:--
ON
8:00
POSITION
CH28
VOLUME
--
--:--
OFF
--:--
ON
8:00
POSITION
CH28
VOLUME
20
--:--
• Pressing
NORMAL
while a PICTURE/SOUND selection is displayed, only the selected mode is reset to the standard
(factory-setting) position.
• Pressing
NORMAL
while a PICTURE/SOUND menu screen is displayed will reset the individual AV Mode setting to the
standard (factory-setting) position.
• The Off timer is cancelled if the power is turned off or set to the Standby mode using
on the remote control or
POWER
on the TV set, or if the power is otherwise interrupted.
• The On Timer is cancelled if the power is turned off using
POWER
.
• If the TV set is turned on by the On Timer, then the TV set will be automatically turned off in two hours if no buttons
are pressed on the TV set or remote control.
E9
TIMER SETTING
E8
SETTING AND ADJUSTMENT (Continued)
AV MODE
DYNAMIC
CONTRAST
50
COLOUR
0
BRIGHTNESS
+10
TINT
SHARPNESS
–10
CONTRAST
50
-
+
SOUND
FEATURE
TIMER
CH-SETTING
PICTURE
[ PICTURE menu screen ]
[ SOUND menu screen ]
PICTURE menu table
SOUND menu table
PICTURE
SOUND
FEATURE
TIMER
CH-SETTING
OFF
2:30
ON
--:--
POSITION
VOLUME
--:--
OFF
--:--
ON
--:--
POSITION
VOLUME
--:--
• The SURROUND, TREBLE, BASS and BALANCE setting can be set differently for
individual AV Mode setting.
21K-FD1SF[EN]
14/9/05, 12:04 PM
5
