Sharp 21JF2 Series, Service Manual

Page: 15 / 78

21JF2-RU/GA/SA/SF/SS
3 – 12
OPTION MODE (FOURTH STAGE)
EEPROM ITEMS OSD DATA LENGTH INITIAL DATA REMARK
***HOTEL MODE O01 0 (0FF) / 1 (0N) 0 OPTION SET UP
***HTL-POS O02 0~99,-- -- OPTION SET UP
***HTL-VOL O03 0~60,-- -- OPTION SET UP
VIF O04 0 (38.0) / 1 (38.9) 1 OPTION SET UP
SECAM O05 0 (DISABLE) / 1 (ENABLE) 1 OPTION SET UP
N443(RF) O06 0 (DISABLE) / 1 (ENABLE) 1 OPTION SET UP
N358(RF) O07 0 (DISABLE) / 1 (ENABLE) 1 OPTION SET UP
FORCE-COL O08 0 (DISABLE) / 1 (ENABLE) 0 OPTION SET UP
S-SYS O09 1(BG ONLY)~15(ALL) 15 OPTION SET UP
AV O10 0 (DISABLE) / 1 (ENABLE) 1 OPTION SET UP
AV2 O11 0 (DISABLE) / 1 (ENABLE) 1 OPTION SET UP
YUV O12 0 (DISABLE) / 1 (ENABLE) 1 OPTION SET UP
S-CTRL O13 0 (DISABLE) / 1 (ENABLE) 1 OPTION SET UP
NICAM O14 0 (DISABLE) / 1 (ENABLE) 0 OPTION SET UP
A2 O15 0 (DISABLE) / 1 (ENABLE) 0 OPTION SET UP
TELETEXT O16 0 (DISABLE) / 1 (ENABLE) 0 OPTION SET UP
BILLINGUAL O17 0 (DISABLE) / 1 (ENABLE) 0 OPTION SET UP
LANGUAGE O18 1~255 63 OPTION SET UP
SEARCH-SPEED O19 1(350)~2(450)~3(550)~4(650)~5(750) 3 OPTION SET UP
R/C-MENU O20 0 (ENABLE) / 1 (DISABLE) 0 OPTION SET UP
LED-CONT O21 0 (ONE LED) / 1 (TWO LED) 0 OPTION SET UP
S-BOOSTER O22 0 (DISABLE) / 1 (ENABLE) 0 OPTION SET UP
SHARP-LOGO O23 0 (DISABLE) / 1 (ENABLE) 0 OPTION SET UP
YUV BKGD ADJ O24 0 (DISABLE) / 1 (ENABLE) 0 OPTION SET UP
WHITE BACK O25 0 (DISABLE) / 1 (ENABLE) 1 OPTION SET UP
BOOSTER O26 0 (DISABLE) / 1 (ENABLE) 0 OPTION SET UP
****MESSAGE O27 0 (DISABLE) / 1 (ENABLE) 0 OPTION SET UP
****MESSAGE SCROLL TIME O28 Message Display Timing 0 OPTION SET UP
LNA TUNER O29 0(Alps) / 1(Matsushita) 0 OPTION SET UP
ONE CHIP IC O30 0(M61260 & M61262) / 1(M61266) 0 OPTION SET UP
MESSAGE INPUT TIMMING O31 0~4 2 OPTION SET UP
*** HOTEL MODE
OPERATION OF HOTEL MODE:
WHEN CHANGE SERVICE DATA O01 TO 1, HOTEL MODE IS ON
WHEN HOTEL MODE IS ON,
1. Max volume data is determined by option setting HTL-VOL (O03)
2. Channel position after POWER ON is determined by option setting HOTEL-POS (O02) (if option setting HOTEL-POS
is not set, processing is according to last position data).
3. User data updates of EEPROM regarding the video and audio control is not allowed.
4. Preset mode is disable.
5. CH SETTING menu is not available.