Sharp 20F540 XFlat, Service Manual, Page: 4 / 36

4
LOCATION OF USER'S CONTROL
Front Panel
POWER
Press
→
On.
Press again
→
Off.
SENSOR AREA FOR
REMOTE CONTROL
MENU
Press
→
Accesses MAIN MENU.
Press again
→
Exits MAIN MENU.
VIDEO IN 2 L-AUDIO-R
CHANNEL UP/DOWN
(
'
) Selects next higher channel.
( " ) Selects next lower channel.
VOLUME UP/DOWN
(+) Increases sound.
( ) Decreases sound.
Basic Remote Control Functions
(INSIDE DOOR)
Note:
• The above shaded buttons on the Remote Control glow in the dark. To use the glow-in-the-dark display on the
remote control, place it under a fluorescent light or other lighting.
• The phosphorescent material contains no radioactive or toxic mater ial, so it is safe to use.
• The degree of illumination will var y depending on the strength of lighting used.
• The degree of illumination will decrease with time and depending on the temperature.
• The time needed to charge the phosphorescent display will vary depending on the surrounding lighting.
• Sunlight and fluorescent lighting are the most effective when charging the display.
1 2 3
4 5 6
7 8 9
0 100
POWER
TV
MENU MUTE
PAUSE
FLASHBACK
DISPLAY INPUT
TV • CATV • VCR • DVD
STOP REC
REW PLAY FF
CH/SKIP
VOL
—
CH
CH
VOL
+
ENTER
A B C D
PERSONAL PREFERENCE
DVD
VCR
CATV TV
DVD VCR
POWER
Press
On.
Press again Off.
REMOTE KEYPAD
Accesses any channel from keypad.
FLASHB ACK
Returns to previous channel.
PERSONAL PREFERENCE
With the Personal Preference buttons,
you can prog ram your favor ite
programs by using the 4 categories A,
B, C and D. The channels can be
accessed
quic kly by using these
buttons.
VOLUME UP/DOWN
(+) Increases sound.
(–) Decreases sound.
• In menu mode, changes or selects
the TV adjustments.
MENU
Press
Accesses MAIN MENU.
Press again Exits MAIN MENU.
CATV/DVD-TV/VCR MODE
SELECT SWITCH
In TV/VCR position, sends power and
channel select commands (Channel
up/down and Random Access buttons)
to the TV and VCR control.
In CATV/DVD position, sends power
and channel select commands to a
cable TV converter and DVD control.
DVD/VCR CONTROL
Infrared Transmitter Window
DISPLAY
Press
Displays receiving channel for
four seconds.
Press again
Removes display.
• Tempor ar ily displa ys receiving
channel when in Closed Caption
mode.
INPUT
Press Switch to exter nal video
INPUT 1 mode.
Press 2 times
Switch to externa
l
video
INPUT 2 mode.
Press 3 times Switch to external video
INPUT 3 mode or COMPONENT mode.
Press
4 times Switch back to the
original TV mode.
ENTER
Used in some instances where a Cable
Con
ver ter Box requires an “enter”
command after selecting channels ,
when using the REMOTE KEYPAD
button.
CHANNEL UP/DOWN
( 8 ) Selects next higher channel.
( 9 ) Selects next lower channel.
• See pages 28 ~ 30 for channel
presetting.
• Moves the “
[
” mark of the MENU
screens.
MUTE
Press
Mutes sound.
Press again Restores sound.
• CLOSED CAPTION appears when
sound is muted.
20F540