‰
3
Dimension: 176 x 250mm
14R2F (01-06)EN
•
The following is a brief explanation of the types of connection that are used for coaxial cables:
After unpacking, check to make sure that the following accessories are included:
Accessories
Antenna Connection
Remote control
Size-AA dry batteries
TV/VIDEO
TV
0
NORMAL
TIMER
FUNCTION
SYSTEM
PICTURE
1
4
7
2
5
8
3
6
9
CH
CH
(1) If your outdoor antenna uses a 75-ohm coaxial cable, then
the connection to the TV is via DIN45325 plug (shown at
right). Plug this into the antenna jack at the rear of the TV
set.
(2) If your outdoor antenna uses a 300-ohm twin-lead flat
feeder, change this for a 300-ohm to 75-ohm impedance
converter and plug it into the antenna jack at the rear of
the TV set.
75-ohm coaxial cable (round cable)
300-ohm twin-lead feeder
• Remove the power cord from the electrical outlet before connecting the antenna to the rear of the TV set.
• If you are using a rod antenna and the signal from TV station is weak or not clear, the picture may not display clearly
or properly. In this case, we recommend that you use an outdoor antenna.
300-75 impedance converter
(only for 14R2F)
Rod antenna (dipole)
with ribbon feeder
•
Rod Antenna Connection
(1) Insert the rod antenna's base post into the antenna
mounting socket until it clicks into position.
(2) Connect the feeder to the impedance converter.
(3) Plug the impedance converter into the antenna jack
at the rear of the set.
• Rod antenna and impedance converter are only
included in model 14R2F.
AV-IN
OUT
AUDIO
VIDEO
Rod Antenna
Feeder
Impedance
Converter
Antenna
mounting socket
Antenna jack
(14R2F)
Headphone Jack
• Select an appropriate volume so as not to injure your hearing.
• To avoid injure your hearing, do not put on the headphone on your ear before plug in the headphone to the
headphone jack and before the power is turn on.
• Take out the headphone from your ear before unplug the headphone from headphone jack and before the power
is turn off.
• The proper impedance for the headphone is 32 ohms.
• Remove the headphone plug from the jack when not using the headphone.
Insert headphone plug into headphone jack to listen to audio with
headphone.
• The audio from the speakers is turned off.
