Picture adjustment
The following table lists the adjustment items shown in the PICTURE menu and how they
change as you press
/
.
*: TINT can only be selected and adjusted when receiving NTSC broadcasts. (AV only)
• WHITE TEMP can only be adjusted on PICTURE menu.
TV/VIDEO
TV
0
NORMAL
TIMER
FEATURE
CH-SET
PICTURE
4
7
2
8
3
6
9
CH
CH
1
5
CH
CH
NORMAL
PICTURE
CONTRAST
Selected item
Press
Press
COLOUR
BRIGHTNESS
TINT
SHARPNESS
To decrease contrast
For less colour intensity
For less brightness
To move tint toward red
For less sharpness
To increase contrast
For more colour intensity
For more brightness
To move tint toward green
For more sharpness
- +
- +
- +
- +
WHITE TEMP
To more reddish
background
To more bluish background
P I C T U R E
C O N T R A S T
5 0
C O L O U R
0
B R I G H T N E S S
+ 1 0
T I N T
S H A R P N E S S
- 1 0
W H I T E T E M P
-
+
C O N T R A S T
5 0
!
Press
PICTURE
to call PICTURE screen.
@
Press
CH
/
CH
to select adjustment items.
#
Adjust using
/
.
• Wait for approximately three seconds to return to PICTURE menu.
$
Repeat steps 2 and 3 above to adjust other items.
%
Press
PICTURE
to return to normal screen.
0 : 0 0
0 : 0 1
0 : 0 2
0 : 0 3
0 : 0 4
O F F
O F F
O F F
O F F
O F F
O F F
0 : 0 5
F l a s h i n g
T I M E R
O F F
2 : 3 0
O N
- - : - -
- - : - -
P O S I T I O N
V O L U M E
T I M E R
O F F
- - : - -
O N
- - : - -
- - : - -
P O S I T I O N
V O L U M E
!
Press
TIMER
to call TIMER screen.
@
Press
CH
/
CH
to select “OFF ”.
#
Press
/
to set time for TV to turn
off.
• Maximum time that can be preset is 12 hours and 50
minutes. Timer start to count down after setting.
$
Press
TIMER
to return to normal screen.
• Five minutes before the preset length of time expires, the remaining time
appears on the screen.
• A flashing display of the remaining time appears during the last few seconds.
When the preset length of time has passed, the TV set enters the Standby
mode.
Off timer
Automatically turns power off after a set length of time has passed.
!
Press
TIMER
to call TIMER screen.
@
Press
CH
/
CH
to select “ON ”.
#
Press
/
to set time for TV to turn
on.
• Maximum time that can be preset is 12 hours and 50
minutes. Timer start to count down after setting.
$
Press
CH
/
CH
to select “POSITION”.
%
Press
/
to set the channel.
^
Repeat step 4 to 5 above to select and set the
“VOLUME”.
&
Press
TIMER
to return to normal screen.
*
Press
to put TV set into Standby mode.
• Power indicator will flash to indicate On Timer is set.
• When the preset length of time setting has passed, the power turns on and a
picture appears on the screen.
• The ON TIMER speaker volume gradually increases from zero to preset
volume.
On timer
Automatically turns power on after a set length of time has passed.
TV/VIDEO
TV
0
NORMAL
TIMER
FEATURE
CH-SET
PICTURE
4
7
2
8
3
6
9
CH
CH
1
5
CH
CH
TIMER
[ TV Set (Bottom) ]
Power indicator
(Flashing)
T I M E R
O F F
- - : - -
- -
- -
O N
8 : 0 0
- - : - -
P O S I T I O N
V O L U M E
T I M E R
O F F
- - : - -
O N
8 : 0 0
C H 2 8
- - : - -
- -
P O S I T I O N
V O L U M E
T I M E R
O F F
- - : - -
O N
8 : 0 0
C H 2 8
- - : - -
2 0
P O S I T I O N
V O L U M E
• Pressing
NORMAL
while a PICTURE selection is displayed, only the selected mode is reset to the standard (factory-
setting) position.
• Pressing
NORMAL
while a PICTURE menu screen is displayed will reset all the item of PICTURE menu to the standard
(factory-setting) position.
• The Off timer is cancelled if the power is turned off or set to the Standby mode using
on the remote control or
POWER
on the TV set, or if the power is otherwise interrupted.
• The On Timer is cancelled if the power is turned off using
POWER
.
• If the TV set is turned on by the On Timer, then the TV set will be automatically turned off in two hours if no buttons
are pressed on the TV set or remote control.
E8
TIMER SETTING
E7
SETTING AND ADJUSTMENT (Continued)
21J1-SF_01EN
22/9/05, 11:24 am
5
