SHARKS SH 1600W, Instruction For Operation And Maintenance

Page: 43 / 53

420 774 335 397 www.sharks-shop.cz
Stránka 43
WARNING:
If the took is operated continously at low speeds for a long time, the motor get overloaded, resulting in
tool malfunction. The speed adjusting dial can be turned only as far as 5 and back to 0. Do not force it
past 5 or 0, or the speed adjusting function may no longer work.
Mode Selector Switch
Operate the mode selector swotch only when the tool is at a standstill. This will help prevent
premature wear of the tool.
●
Hammer drilling
For frilling in concrete, masonry, etc., depress the release button 3 and rotate the mode selector switch
4 so that the pointer points to the symbol
. Rotate the mode selector switch 5 so that it points to the
symbol . Use a tungsten-carbide tipped bit.
● Chiseling
For chipping, scaling or demolition operations, depress the release button 3 and rotat the mode
selector switch 4 so that the pointer points to the symbol . Rotate the mode selector switchh 5 so
that it points to the symbol . use a bull point, cold chisel, scaling chisel,etc.
WARNING:
The mode selector switch 4 must always be locked in the „Chiseling“ position when chiseling.