420 774 335 397 www.sharks-shop.cz
Stránka 18
- You must not connect other appliances to the same mains socket as the fan heater.
- Do not use this fan heater in the immediate surroundings of a bath, a shower or a swimming pool.
- If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
- Make sure heater is always under surveillance and keep children and animals away from it;
- Do not place the appliance on moving vehicles or some where easy to be tipped over.
- When you don’t use the appliance for a long time, unplug the appliance. Don’t leave the heater for a
considerable amount of time when in use. Pull the plug straight out ,never remove the plug by pulling
on the cord .
- Keep the heater far from curtain or places where the air inlet can easily be blocked.
- The power coupler is waterproof when not in use. In order to prevent possible electric shock or
leakage current, never use the appliance with wet hand or operate the appliance when there is water
on the power cord.
- Do not dispose of electrical appliances as unsorted municipal waste, use separate collection
facilities. Contact you local government for information regarding the collection systems available. If
electrical appliance are disposed of in landfills or dumps, hazardous substances can leak into the
groundwater and get into the food chain,damaging your health and well-being.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory
or mental capabilities, or lack of experience and knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a person responsible for their safety.
- Children should be supervised to ensure that they do not play with the appliance.
USING INSTRUCTIONS
●
Position the fan heater so that it stands upright on a firm surface and at a safe distance from wet
environments and flammable objects.
●
Connect the fan heater to the mains.
●
Set the thermostat knob to the MAX and let the heater operate with full power.
●
The fan heater will switch on when the heating selector is set to one of the power settings.
●
Once the room reaches the required temperature, heating element will stop working but fan also
working .Once the temperature decreased, the heating element will be working. The fan heater now
starts and stops automatically and thus keeps the room temperature constant.
●
Before switch off the heater, please turn the thermostat to MIN position and turn the switch to fan
position, let the appliance cool down for two minutes then turn off the heater and pull out the plug.
CLEANING AND MAINTENANCE
●
Before cleaning the appliance,disconnect it from the socket and let it cool down. The enclosure is
easily to get dirty, wipe it often with soft sponge. For every dirty parts, wipe with a sponge dipped in
<50°C water and mild detergent,then dry the heater enclosure with clean cloth. Be careful not to let the
water enter the appliance inner. Don’t splash water onto the heater,never use solvent like gasoline etc.
to clean the heater,in order to protect the enclosure.
●
When you store the heater, let it cool down first, keep it dry. Then cover it with a plastic bag, put in a
packing box and store it in a dry, ventilated place.
