QP500
QP600
7
Note:
All connectors are designed fault-preventing to avoid misconnection. If you cannot attach the female con-
nector to the male connector of the drive or peripheral, please check if both connectors are attached in the
correct orientation.
Do not force to plug the female connector into the male connector in wrong orientation, nor modify any
of the components, as this will damage the PSU and your hardware. SHARKOON warranty does not cover
damage caused by incorrect handling.
4.2.2 Connecting mainboard and graphics card(s)
1. Plug the ATX power connector (fig. 1) to the respective jack on the mainboard.
fig.
1
2. In case your mainboard also provides an additional 4-pin or 4+4-pin power connector (the so called P4
resp. P8 connector), also plug the respective connector (fig. 2).
fig.
2
Note:
The power connection of the mainboard depends on the vendor and may vary. For detailed information
on how to establish the power connection refer to your mainboard’s manual.
