6
3
When one side of the microfibre cleaning pocket
gets dirty, just flip the mop head and you can
quickly continue cleaning with the other side.
(
Fig. 9
)
3
Use the scrubbing side of the Dual Purpose
cleaning pocket to break up the tough stains
and then turn the mop head around to use the
shaggy side of the Dual Purpose cleaning pocket
to lift up and lock away all of the dirt and debris.
(
Fig. 9
)
NOTE:
For deeper cleaning/sanitisation of
household bacteria such as e-coli, salmonella, or
StaphA., the area in question must be cleaned
continuously for 30 seconds (or 30 back and
forth strokes).
4
When the water tank is empty, the steam
mop will stop producing steam. You can refill
the water tank at any time as long as the
mop is unplugged from the outlet. Follow
the instructions from page 4. This applies to
switching the mop heads or microfibre cleaning
pocket as well.
NOTE:
Please wait 2-3 minutes for the Steam
Mop to cool off before removing the mop head
or the microfibre cleaning pocket. Never leave
the steam mop with a damp/wet microfibre
cleaning pocket on any floor.
Using Your Shark
®
Steam Pocket
™
Mop - cont.
fig. 9
USING THE CARPET GLIDER
1
The Carpet Glider can be used with the All-
Purpose Head to lightly steam your carpet and
area rugs. Just place the mop head with the
microfibre cleaning pocket attached into the
glider. (
Fig. 10
)
2
Move the steam mop back and forth across a
section of the carpet. (
Fig. 11
)
fig. 10
fig. 11
The steam mop will not clean your carpeting
or area rugs. However, it is great for grooming
and freshening.
