sharkclean .com
sharkclean .com
USING YOUR VACUUM
USING YOUR VACUUM
CONTROLS
CLEANING MODES
Press the
On/Off
button on the handle to turn on
power. To turn off power, press the button again.
For an added boost of power, push and hold the
Boost
button on the underside of the handle.
The Boost icon will blink white in this mode.
Release the button to return to standard power.
BOOST MODE
POWER
Use the PowerFins floor nozzle for powerful cleaning
on both bare floors and carpets. The brushroll is
activated when the hand vacuum is connected and
powered on, and the handle is tilted back.
UPRIGHT
To detach the floor nozzle from the wand, step on
the nozzle while pressing the nozzle release button
at the bottom of the wand. Lift the wand to remove
it. To reattach the wand, align it over the neck of
the floor nozzle, then slide it on until it clicks into
place.
ABOVE-FLOOR WITH WAND
Detach the hand vacuum to clean above-floor areas.
Press the release buttons on both sides of the handle,
and lift the hand vacuum off the wand. To attach
an accessory to the hand vacuum, slide it into the
opening in the nozzle. To remove, press the release
buttons on both sides of the handle and slide out
the accessory.
ABOVE-FLOOR WITH HAND VACUUM
NOTE:
All accessories are compatible with both the wand
and the hand vacuum.
