background image

sharkclean .com

sharkclean .com

TECHNICAL SPECIFICATIONS

Voltage:  

120V, 60Hz

Watts: 800W
Amps: 6.7A

TIP: 

You can find the model and serial 

numbers on the QR code label on the 

bottom of the back of the vacuum pod.

Benefits of registering your product and 

creating an account:
•  Get easier, faster product support and 

access to warranty information

•  Access troubleshooting and product care 

instructions

•  Be among the first to know about 

exclusive product promotions

RECORD THIS INFORMATION

Model Number:  ����������������������������������������������������������������������������������������������������
Serial Number:  ������������������������������������������������������������������������������������������������������
Date of Purchase:  �������������������������������������������������������������������������������������������� 

(Keep receipt)
Store of Purchase:  ������������������������������������������������������������������������������������������

REGISTER YOUR PURCHASE

 registeryourshark.com

 

 Scan QR code using  
mobile device

FIVE (5) YEAR LIMITED WARRANTY

The Five (5) Year Limited Warranty applies to purchases made from authorized retailers of 

SharkNinja 

Operating LLC.

 Warranty coverage applies to the original owner and to the original product only and is 

not transferable.
SharkNinja warrants that the unit shall be free from defects in material and workmanship for a period 

of five (5) years from the date of purchase when it is used under normal household conditions and 

maintained according to the requirements outlined in the Owner’s Guide, subject to the following 

conditions and exclusions:

What is covered by this warranty?

1.  The original unit and/or non-wearable components deemed defective, in SharkNinja’s sole discretion, 

will be repaired or replaced up to five (5) years from the original purchase date.

2.   In the event a replacement unit is issued, the warranty coverage ends six (6) months following the 

receipt date of the replacement unit or the remainder of the existing warranty, whichever is later. 

SharkNinja reserves the right to replace the unit with one of equal or greater value.

What is not covered by this warranty?

1.   Normal wear and tear of wearable parts (such as foam filters, HEPA filters, pads, etc.), which require 

regular maintenance and/or replacement to ensure the proper functioning of your unit, are not covered 

by this warranty. Replacement parts are available for purchase at 

sharkaccessories.com

.

2.   Any unit that has been tampered with or used for commercial purposes.
3.    Damage caused by misuse (e.g., vacuuming up water or other liquids), abuse, negligent handling, 

failure to perform required maintenance (e.g., not cleaning the filters), or damage due to mishandling 

in transit.

4.   Consequential and incidental damages.
5.    Defects caused by repair persons not authorized by SharkNinja. These defects include damages caused 

in the process of shipping, altering, or repairing the SharkNinja product (or any of its parts) when the 

repair is performed by a repair person not authorized by SharkNinja.

6.   Products purchased, used, or operated outside North America.

How to get service

If your appliance fails to operate properly while in use under normal household conditions within the warranty 

period, visit 

sharkclean.com/support

 for product care and maintenance self-help. Our Customer Service 

Specialists are also available at 

1-800-798-7398

 to assist with product support and warranty service options, 

including the possibility of upgrading to our VIP warranty service options for select product categories. So 

we may better assist you, please register your product online at registeryourshark.com and have the product 

on hand when you call.
SharkNinja will cover the cost for the customer to send in the unit to us for repair or replacement. A fee of 

$24.95 (subject to change) will be charged when SharkNinja ships the repaired or replacement unit.

How to initiate a warranty claim

You must call

 1-800-798-7398

 to initiate a warranty claim. You will need the receipt as proof of purchase. 

We also ask that you register your product online at registeryourshark.com and have the product on hand 

when you call, so we may better assist you. A Customer Service Specialist will provide you with return and 

packing instruction information.

How state law applies

This warranty gives you specific legal rights, and you also may have other rights that vary from state to 

state. Some states do not permit the exclusion or limitation of incidental or consequential damages, so the 

above may not apply to you.

Summary of Contents for UV650










Reviews: