E
nglish
The call will be answered. Audio will be on the headset.
(See
VOX Activation / Deactivation
on section H.)
You also have the option to answer the call normally by
pressing the
MFB (1)
for 1 second (1st beep).
End a Call:
Press the MFB (1) for 1 second to end the call (1st beep).
Voice Dial:
Note:
Before using this feature, make sure that the voice
dialing function of your phone is activated. Some phones
need to have at least one voice tag recorded in the pho-
ne’s memory, not on the SIM card! (Kindly refer to your
phone’s manual.)
1.
Press the
MFB (1)
button for 1 second.
2.
A beep will be heard on the headset prompting you
to say the voice tag of the contact to call and the
Status
Indicator (2)
will turn steady blue.
3.
Say the voice tag exactly as how you recorded it.
4.
The voice tag will be played back to you and then the
phone will dial the number automatically.
Reject a Call:
Assuming the
VOX
is activated: Reject a call by being
silent for 10 seconds. The call will automatically be rejec-
ted. (See
VOX Activation / Deactivation
on section H.)
Volume Setting:
Press the
Volume Up (3)
or
Down (4
) button repeatedly
until the desired level is reached. A beep will be heard as
lowest and highest levels are reached.
Reconnection to a paired device:
You can reconnect to the last used device by pressing
the
MFB (1)
button. If you want to reconnect to another
paired device, please use its Bluetooth menu.
2) Intercom Mode:
Start an Intercom Conversation:
Long press the
MFB (1)
for about 3 seconds until 2nd
beep will be heard.
SHARKTOOTH SHARK
will connect to
Intercom. Both headsets are now connected. Full duplex
conversations can be made.
