Shark SGP-3030 Operator'S Manual Download Page 18

18

SGP SERIES PRESSURE WASHER  

OPERATOR’S MANUAL

PREVENTATIVE MAINTENANCE

This pressure washer was produced with the best available materials and quality craftsmanship. However, you as the
owner have certain responsibilities for the correct care of the equipment. Attention to regular preventative mainte-
nance procedures will assist in preserving the performance of your equipment. Contact your Shark, Inc. dealer for
maintenance. Regular preventative maintenance will add many hours to the life of your pressure washer. Perform
maintenance more often under severe conditions.

MAINTENANCE SCHEDULE

Engine Oil

Inspect

Daily

Change

Every 25 hours

Filter

Every 50 hours

Air Cleaner

Inspect

Every 50 hours or monthly

Clean

Every 3 months

Battery Level

Check monthly

Engine Fuel Filter

500 hours or 6 months

Spark Plug Maintenance

500 hours or 6 months

Clean Fuel Tank(s)

Annually

Replace Fuel Lines

Annually

Pump Oil

Inspect

Oil level daily

Change

After first 50 hours, then every 500 hours or annually

Clean Burner Filter

Monthly (More often if fuel quality is poor)

Remove Burner Soot

Annually

Burner Adjustment/Cleaning

Annually

Replace Burner Nozzle

Annually

Descale Coil

Annually (More often if required)

Replace High Pressure Nozzle

Every 6 months

Replace Quick Couplers

Annually

Clean Water Screen/Filter

Weekly

Replace HP Hose

Annually (If there are any signs of wear)

OIL CHANGE RECORD

Date Oil Changed

Month/Day/Year

Estimated Operating

Hours Since Last

Oil Change

Date Oil Changed

Month/Day/Year

Estimated Operating

Hours Since Last

Oil Change

Summary of Contents for SGP-3030

























Reviews: