7
8
www.sharkclean.eu
0800 862 0453
Using Your Portable Steam Cleaner
DIRECT SPRAY STEAM BOTTLE USE
Cleaning Tip:
Direct steam spray for cleaning hard to
reach nooks & crannies and stubborn sticky messes
where focused steam power may be needed. Direct steam
spray can loosen and dislodge compact dirt often found
in corners and tight places where traditional methods and
cleaning tools tend to push dirt into, making it difficult to
reach and clean. Spray direct steam and wipe clean with a
cleaning cloth.
CAUTION:
Direct steam spray temperature is
extremely hot closest to the nozzle and can damage
surfaces if held directly focusing in one spot too long.
Be sure to constantly move and adjust the steam
spray to avoid causing damage.
1
To attach the Concentrator Nozzle, press the lock
release buttons on the concentrator nozzle and slide
onto the Steam Bottle nozzle. Press in and turn
clockwise until the concentrator nozzle clicks into
place.
(fig. 2)
2
To remove the Concentrator Nozzle, press the lock
release buttons and slide it out.
1
To attach the accessory hose, press the lock release
buttons on the accessory hose and slide onto the
Steam Bottle nozzle. Press in and turn clockwise
until it clicks into place.
(fig. 3)
2
To remove the accessory hose, press the lock
release buttons in and slide out.
3
Select the desired cleaning tool for use. Follow
the cleaning tool sub assembly instructions for the
selected tool.
GENERATING STEAM
1
Plug the unit in and wait about 30 to 45 seconds
then press and hold the steam trigger to activate the
pump. You will immediately hear steam generating
and begin to see visible results either from the nozzle
or the attached cleaning tool. It is recommended
that you wait at least 30 seconds before pulling the
trigger as this will minimise water spitting.
(fig. 5)
2
Once you release the steam trigger, the pump will
stop delivering water to the boiler and the steam will
reduce to a stop when the boiler becomes empty.
CAUTION:
Steam is hot and can cause burns, so
please use with caution.
IMPORTANT:
Once plugged in, the Blue LED will
illuminate, and your portable steam cleaner cleaning
system will be ready to use within 30-45 seconds.
(fig. 4)
WARNING:
Your portable steam cleaner is designed
to clean surfaces that will withstand high heat and
moisture. Do not use on unsealed wood surfaces
(especially wooden antique furniture), unglazed
ceramic tile, or surfaces that have been treated
with wax, oils, varnishes, or shellac. The sheen
may be removed by the heat, steam, and friction
of the cleaning tools. Lacquer and polyurethane
coatings provide a hard durable protective finish that
withstands moisture but it is always recommended
to test an isolated area of the surface to be cleaned
before proceeding.
We also recommend you check the use and care
instructions from the surface manufacturer.
NOTE:
Make sure surfaces are free of crumbs and
debris before using the portable steam cleaner.
fig. 2
fig. 3
fig. 4
fig. 5
