10
0 8 0 0 8 6 2 0 4 5 3
MAINTENANCE
To keep your vacuum’s suction power optimal, follow these instructions.
Make sure unit is off and cord unplugged.
CHECK FOR BLOCKAGES
1
Use a coin to unlock the 3 locks on the
bottom of the floor nozzle.
2
A portion of the base is removable to
allow for better access to the brush
roll and exposure to the airway. Shine
a torch from the bottom to check for
possible blockage in the airway.
3
Remove any string, carpet fibers or
hair that may be wrapped around
the brush roll. There is a groove on
the brush bar that allows a pair of
scissors to cut across it to loosen
up the debris.
4
To reassemble, replace base by
lining it up along the front of the
nozzle. Push down to snap into
place. Lock the 3 locks.
STEP 1
STEP 2
STEP 4
STEP 3
