Shark Navigator NV106 Series, Instructions Manual, Page: 6 / 20

ENGLISH
9 10
sharkclean .com sharkclean .com
USING YOUR VACUUM
Indicator Light
NOTE:
The height of your power nozzle
has been optimized for easy pushing
and superior cleaning on all floor
types. There is no need to make any
height adjustments as you transition to
different floor and carpet types.
NOTE: Always hold the vacuum body
when using the hose to clean so that it
does not tip over.
DO NOT
pull vacuum cleaner around
by the hose.
DO NOT over-extend the hose.
Your SHARK NAVIGATOR
®
can be used
to clean all surface types.
1 Plug in the vacuum.
2
Insert the hose connector into
the opening on the back of the
vacuum body.
3
Place your foot on the power nozzle
and tilt the handle back.
4 CLEAN CARPETS:
Move the Brushroll button on the
top of the vacuum body to the ON
position and tilt the handle back to
activate the brushroll. The brushroll
indicator
light will turn green.
5 CLEAN BARE FLOORS:
To clean bare floors or to use the
hose, move the Brushroll button to
the OFF position. The brushroll will
not spin and the indicator light will
turn off.
6 USING ACCESSORIES:
You can attach the accessories to the
handle or to the extension wand to clean
with a longer reach.
a Stand the vacuum upright.
b
To remove the handle only, press
the release button on the handle.
c To remove the handle with
the extension wand, press the
extension wand release button on
the back of the vacuum.
d
Attach accessory to the end of
the handle or the wand.