sharkclean .com
sharkclean .com
2
3
3
1
ASSEMBLY
1.
Place the
Floor Nozzle
on a level surface. Align the tube of the floor nozzle with the tube on
the Lift-Away®
Pod
and slide the pod down until it clicks into place.
2
Insert the end of the
Extension Wand
into the tube on the back of the Lift-Away® pod until
it clicks into place.
3
a)
Insert the
Handle
into the top of the extension wand until it clicks into place.
b)
Insert the end of the
Stretch Hose
into the connector on the back of the Lift-Away® pod.
For proper operation, ensure all parts are firmly clicked into place.
b
a
USING YOUR VACUUM
SETTINGS
INDICATOR LIGHT
WHAT DOES THE BRUSHROLL INDICATOR
LIGHT MEAN?
Solid Green:
The brushroll is on and working
as it should.
Solid Red:
There is a jam in the brushroll
area. Turn your vacuum off and remove
the blockage.
Flashing Red:
The vacuum is overheated.
Turn the vacuum off and wait for it to cool
down. See Troubleshooting section for
more information.
No Light:
The vacuum is off.
BRUSHROLL INDICATOR LIGHT
Press the
Power/Surface Switch
at the
top of the pod.
Select surface setting:
O Power Off
I Bare Floor
For bare floors and small area rugs.
II
Carpet
For carpets.
Suction Control
offers variable suction
based on your needs. Rotate counter-
clockwise to reduce suction and increase
maneuverability on carpets. Rotate clockwise
to increase suction on bare floors.
POWER/SURFACE SWITCH
SUCTION CONTROL
NOTE:
For deep carpet cleaning per ASTM F608 (embedded dirt in carpets), use setting
II, Carpet
.
NOTE:
There are a variety of accessories that are compatible with this vacuum series. The top flap of your box shows the
select accessories that are included with your model. For additional accessories, visit
sharkaccessories.com