11
AU
02 8 8 01 76 6 6
NZ
0 8 0 0 112 6 60
10
AU
sharkclean .com . au
NZ
sharkclean .co. nz
Filter
Door
Release
EMPTYING THE DUST CUP
To remove
Dust Cup
, press release button on
top of the pod. Tilt dust cup away from wand,
then lift to remove.
To reinstall, place bottom of dust cup into
pod and then tilt until it clicks into place.
To empty debris into the bin, press lower
release button and bottom of dust cup will
drop open.
To remove collected debris from
Lint Screen
,
press top release buttons either side of the
handle and lift handle to access screen.
CLEAN POST-MOTOR FILTER EVERY YEAR
Place unit flat on the floor so you can see the post-motor filter underneath. With the dust cup
removed, press button on filter housing and pull forward. Remove post-motor filter by pressing
black tab until it clicks and is released from the unit. To reinstall, insert the filter into the unit by
clicking into place and reattach the filter housing.
Regularly wash, dry and replace the filters
to maintain your vacuum’s suction power.
To prevent damage from cleaning chemicals,
rinse filters with cold water only. Allow all
filters to air-dry for at least 24 hours before
reinstalling them to prevent liquid from being
drawn into electric parts.
CLEANING AND REPLACING THE FILTERS
CLEANING FILTERS
IMPORTANT:
DO NOT
use soap when
cleaning the filters.
IMPORTANT:
Unplug the cord before performing any maintenance.
NOTE:
The pre-motor filters should be replaced every 2.5 years. The post-motor filter should be replaced every 3 years.
NOTE:
Empty the dust cup when or before the debris reaches the max fill line.
Filter
Filter
Housing
CLEAN PRE-MOTOR FILTERS EVERY MONTH
Remove
Dust Cup
, then lift out
Filters
.
