Shark IQ R101AE Owner'S Manual Download Page 7

sharkclean .com

sharkclean .com

MAINTENANCE

EMPTYING THE ROBOT DUST BIN

Press the 

Dust Bin Release Tabs

 and slide out the 

dust bin.

CAUTION: 

Turn off power before performing any maintenance.

To avoid spills, be sure to hold the dust bin in an 

upright position. Pinch and lift to open the lid.

Empty debris and dust into trash.

Look between the filter and plastic shield and make 

sure there is no debris buildup.
Remove and clean any debris build-up as needed 

with a dry cloth or soft brush.

USING 

THE SHARK IQ ROBOT®

WI-FI TROUBLESHOOTING

•  To use the app, your phone must be connected 

to a 2.4GHz network. The app will only work on a 

2.4GHz network.

•  Typical home Wi-Fi networks support both 2.4GHz 

and 5GHz. 

•  Do not use a VPN or a proxy server.
•  Make sure Wi-Fi isolation is turned off on the 

router.

•  If you cannot connect, call 1-888-228-5531.

Get the most out of your Shark iQ Robot® with these app features:

•  Interactive Map 

Your robot knows where it is 

in your home. Identify rooms 

for Room Select.

•  Room Select 

Immediately send your robot 

directly to any room on that 

floor.

•  Recharge and Resume 

Use Recharge and Resume 

to help ensure complete, 

multi-room coverage in your 

home. 

•   Scheduling 

Set whole home cleanings 

for any time, any day.

•  Control From Anywhere 

Wherever you are, you’re in 

control of your robot.

•  Cleaning Reports 

Each time your robot cleans, 

your app will generate a 

cleaning report.

Search for 

SharkClean

 in the app store and download the app to your iPhone

TM

 or Android

TM

.

ERROR CODE

PROBLEM

! (RED) + Wi-Fi indicator (RED Flashing)

Wrong password for Wi-Fi

! (Flashing red) + Wi-Fi (RED)

SSID cannot be found, try connecting again

! + Wi-Fi (Flashing RED alternately)

Wrong user name or password for your Shark account

! + Wi-Fi (Flashing RED at the same time)

Cannot connect to Wi-Fi

USING THE SHARKCLEAN™ APP AND VOICE CONTROLS

SETTING UP VOICE CONTROL WITH THE GOOGLE ASSISTANT OR AMAZON ALEXA 

Visit 

sharkclean.com/app

 for setup instructions which include how to enable Shark Skill for Amazon Alexa 

and using with Google Assistant. 

Google Assistant: 

“OK Google, tell Shark to start cleaning.”
“OK Google, tell Shark to pause my robot.”
“ OK Google, tell Shark to send my robot to  

the dock.”

Amazon Alexa: 

“Alexa, tell Shark to start cleaning.”
“Alexa, tell Shark to pause my robot.”
“ Alexa, tell Shark to send my robot to  

the dock.”

Please visit 

sharkclean.com/app 

or call 1-888-228-5531 for answers to all your app questions. 

RUMPELS

TIL

T

SKI

N

Schedule

Hist

ory

EDIT

OPTIONS

Maps

C

ontr

ol

Shar

k

Kitchen

Living Room

Dining Room

Summary of Contents for IQ R101AE
















Reviews: