sharkclean .com
sharkclean .com
5 ft.
3 ft.
3 ft.
PREPARING FOR USE
Place the charging dock on a level surface with its back against a wall, in a space without obstructions, that
can easily be accessed by your robot. Remove any objects that are closer than 3 feet (1 meter) from either
side of the dock, or closer than 5 feet (1.52 meters) from the front of the dock. Plug the
Charging Adapter
into a wall outlet. The dock must be plugged in continually for the robot to find it. The dock indicator will
turn green when the dock is plugged in. The robot will beep when it starts charging on the dock.
If the robot has no charge and cannot return to the
charging dock, place it on the dock manually. If the
battery was depleted, it may take up to 60 seconds
for the robot lights to come on after manually
placing on the dock.
When the cleaning cycle is complete, or if the battery
is running low, the robot will search for the dock.
If your robot doesn’t return to the dock, its charge
may have run out.
CHARGING DOCK SET-UP
INSTALLING THE SIDE BRUSHES
CHARGING
5 ft.
3 ft.
3 ft.
Snap the 2 included
Side Brushes
onto the square
posts on the bottom of the robot.
CHARGING THE SHARK ION
TM
ROBOT
IMPORTANT:
The Shark Robot has a pre-installed rechargeable battery. Battery must be fully charged before using.
To charge, the
Power
button on the side of the robot
must be in the ON position (I).
NOTE:
When manually placing the robot on the dock, make sure the
Charging Contacts
on the bottom of the robot are
aligned with the dock. To ensure the robot is docked correctly, refer to the
Charge Indicator Lights
section.
