MAINTENANCE/CLEANING
Reduction in Airflow or Overheating
A change in airflow or air power, airflow blockages,
overheating, and/or visible buildup on the back of the
unit indicates your hair dryer needs to be cleaned. We
recommend using the Small Cleaning Brush included
with your purchase to clean off the back of the hair
dryer.
ALCI OPERATION
Electricity flickers or trips circuit breaker during use.
This dryer is equipped with an Appliance Leakage
Circuit Interrupter (ALCI), a safety feature that renders
it inoperable under abnormal conditions. Should the
dryer turn off in use, press the red Reset button on
the plug and the dryer should function normally. If
the dryer does not reset, please check your circuit
breaker. If the issue persists, ensure there are no other
appliances plugged in within the room where the dryer
is being used. Do not use the dryer with a power strip.
OVERHEATING
Hair dryer is overheating or shuts off.
This unit is equipped with a temperature-protective
thermostat. If for some reason your hair dryer
overheats, the thermostat will automatically turn the
unit off. To prevent power-down recurrence, unplug
the hair dryer and set it aside to cool, or cool down
using the cool shot button during use. Overheating
may result if the unit is powered on for a long duration,
or can indicate a blockage or dust buildup. We
recommend using the Small Cleaning Brush included
with your purchase to clean off the back of your unit.
If overheating continues to occur, contact Customer
Service at
855-522-0912
.
1. Turn the dryer on and off.
2. Adjust the airflow. pressing the left-hand button
allows you to choose a low, medium, or high
airflow.
3. Adjust the temperature. Pressing the right-hand
button allows you to choose a low, medium, or
high temperature.
4. To attach any accessories included with your
model, press them into place on the front of the
dryer. You will know they are properly attached
if the IQ logo on the back of the dryer illuminates
when the dryer is turned on.
5. Press and hold the Cool Shot button for a cool
burst of air to set your style.
6. Press the ALCI button to reset the dryer.
See Troubleshooting & Error Codes for more
information.
For further operating instructions,
please consult the Styling Guide
or scan the QR code.
Storage, Cord Safety, and Maintenance/Cleaning:
• Ensure the cord is not knotted, twisted, or wrapped
around any nearby objects when in use.
• To store the dryer when not in use, wrap the cord
in a circle and use the Velcro cord tag to secure the
cord in place.
• Use the Small Cleaning Brush included in the box at
purchase as needed.
TROUBLESHOOTING & ERROR CODES
OPERATING INSTRUCTIONS
1
2
4
5
6
3
Overheating
Error Code
If you are experiencing a different error code,
please
scan the QR code
for additional troubleshooting
or contact Customer Service at
855-522-0912
.
Clean dust and debris from
the rear hair dryer filter.
Remove hair from
brush bristles.
