background image

INSTALLING AND REMOVING THE FILTER

NOTE: 

Always remove all protective packaging from the filter before installing.

When the filter timer has 0 hours remaining, the FILTER LIFE button on the top control panel will blink, indicating that it’s time to install a 

new filter.

1. 

Turn off and unplug the unit before removing or installing filters.

2. 

Remove the back cover from the unit by pressing the tabs at the 

top (1), then pulling the cover toward you.

3. 

To remove the old filter, pull it out by the tabs at the top and 

bottom of the filter (2). Discard old filter in trash.

4. 

Remove all packaging and wrapping from the new filter.

5. 

Insert the new filter, then replace the filter cover. Insert the tabs 

on the bottom of the cover into the slots on the unit (3). Press 

the top of the cover, then the sides, until it clicks into place.

6. 

Plug the unit back in and turn on power. Calibration will begin.

7. 

After installing a new filter, press and hold the Filter Life button 

on the top control panel for 3 seconds to reset the timer. The unit 

will beep when the timer is activated.

Disposing of used filters 

Filters can’t be cleaned or recycled. After removing a used filter, wrap it in an airtight plastic bag for disposal. As an extra precaution, wear 

gloves when handling a dirty filter.

MAINTAINING YOUR AIR PURIFIER

NOTE: 

Always unplug the unit before doing any cleaning or maintenance.

Exterior Cleaning: 

For best results, clean the exterior of the unit every two months or 

as needed. Use a microfiber cloth to remove dust. To sanitize, wipe 

down the exterior with a microfiber cloth dampened with warm, 

soapy water. Avoid excess water and abrasive chemical cleaners to 

prevent damage.

Interior Cleaning: 

For best results, clean the interior of the unit every two months 

or as needed. Remove the filter cover, take out the filter, and 

use a vacuum cleaner or a microfiber cloth to remove dust and 

debris from the interior of the unit. 

DO NOT 

use abrasive chemical 

cleaners on the inside of the unit.

3

2

Remove  

filter  

from  

plastic  

packaging

1

Summary of Contents for HE600 Series








Reviews: