H
I
J
E
F
G
17
CAP AND ChEEkS
NECk SuPPORT
Perform the operation in reverse. Insert
the front plastic part in its housing. The 3 clips
must be properly engaged (E).
Clip the 2 snaps on the rear of the cap (F).
Replace the cheeks pads by clipping it (G).
IMPORTANT: Check that the chin straps aren’t
twisted or wedged under the cheeks pad.
TExTIlE PARTS - REPlACE
Insert the rear part of the neck support (H).
Slide the side edges under the seal (I).
Finish by doing the same operation
for the front (J).
