DVD
-SH02 King
44
VCD/Audio CD DIRECT Functions
During a VCD or Audio CD playback, this unit only
supports the time search function.
1. Pressing the [
TIME
] button during play will display
the OSD for VCD/Audio CD search.
2. When the time is set, play from this position will start
immediately.
NOTES
: Audio CD playback’s background is start up logo.
VCD PLAYBACK CONTROL (PBC)
This function is only available for Video-CD version 2.0
or higher. The PBC operation may differ by disc, therefore,
refer to the instructions for each disc.
– Press the [
MENU/PBC
] button to switch on/off the
PBC function. The OSD message “PBC ON” or
“PBC OFF” will be displayed.
– On the PBC menu, the [
PREV
] and [
NEXT
] buttons are
dedicated for “GO BACK TO PREVIOUS PAGE” and
“GO TO NEXT PAGE” of the PBC menu, if available.
VCD PBC MENU Page 1
VCD PBC MENU Page 2
Digit Buttons
On the PBC menu, all items must be selected and exe-
cuted by using the number buttons only.
DivX and XviD
DivX and XviD are compressed video formats recorded
on computer. DVD player can open and play both of this
formats with polish subtitles.
Note
! Don’t use in names of files dots, commas, etc.
Put CD with movie in to the DVD player. Mark both files
.avi and .txt. Start playing.
Other function are the same like in VCD (Forward, Bac-
kward, Subtitle, Stop, Play/Pause).
Troubleshooting
Before requesting service for this player, check the items
below for a possible cause of the problem you are expe-
riencing. Some simple checks or a minor adjustment on
your part may eliminate the problem and restore proper
operation.
PICTURE
No Picture
– Ensure that the equipment is connected properly.
– Connect the video cable securely into the appro-
priate jacks.
– Select the appropriate video input mode on the TV
so the picture from the DVD video player appears
on the TV screen.
Picture Distorted
– The disc is dirty and needs to be cleaned.
– It is normal for some distortion to appear while
Fast Motion Playback.
Picture not Suit TV Screen
–
Change “TV SCREEN” setting in DVD Setup Menu
to suit your television.
SOUND
No Sound
– Check the connections.
– Check the volume on the equipment you have
connected.
– Connect the audio cable securely into the appro-
priate jacks.
– Ensure that the input settings for the television
and stereo system are correct.
– IF the player is in mute mode, please press “Mute”
button again to turn on sound.
No Stereo Sound Effect when
Playing Video CD or CD
– Check the connections.
– Press “Stereo” button to select stereo sound.
THE REMOTE CONTROL
DOES NOT WORK PROPERLY
– Remove the obstacle existing between the DVD
player and the remote control.
– The remote control is too far from the DVD video
player. Operate the remote control within opera-
ting distance.