17
18
sharkclean .e u
To keep your vacuum’s
suction power optimal,
follow these instructions.
Make sure unit is
off and cord is unplugged.
MAINTENANCE
EMPTYING THE DUST CUP
1
Empty dust cup when
debris reaches MAX fill
line. Remove by pulling
up on latches on
Dust Cup handle.
2
Hold dust cup over
a bin and press bottom
release latch. Turn dust
cup over and press top
release latch.
CLEANING THE FILTERS
1
Pre-Motor (foam and felt):
With the dust cup removed, take out the foam
and felt filters, and rinse with water. Let filters
air-dry completely before reinstalling. Tap loose
dirt off filters between washes as needed.
2
Post-Motor (HEPA):
To access the HEPA filter, reach under the grill, pull
the latch forward, and pull the grill away from the
vacuum. Remove the filter assembly, then remove
the black foam filter and plastic frame from
the assembly. Rinse both HEPA filter and black
foam filter and allow to air dry completely before
replacing. To assemble, place the foam onto the
HEPA then place the frame on top. Hand wash only.
STEP 1
STEP 2
Hand wash filters
only with water to
prevent damage from
cleaning chemicals.
Allow ALL filters to
air-dry completely
before replacing
them in the vacuum
to prevent liquid from
being drawn into
electric parts.
IMPORTANT:
DO NOT
use soap
when cleaning the
filters.
DO NOT
scrub
HEPA filter material.
NOTE:
Clean the dust
screen inside the dust
cup as required.
RECOMMENDED
FILTER CLEANING
SCHEDULE:
Pre-Motor Filter Kit
(Foam & Felt)
Clean every 3 months.
Post-Motor Filter
(HEPA)
Clean once a year.
0800 862 0453
Felt filter
Foam filter
Filter frame
PRE-MOTOR
POST-MOTOR
NOTE:
To remove the
pre-HEPA filter frame,
pull on either of the bars
indicated by the arrows.
STEP 1
STEP 2
