sharkclean .com
sharkclean .com
MAINTENANCE
EMPTYING THE DUST CUP
Press the wand release button and lift the handheld
vacuum off the wand.
With the dust cup attached to the handheld vacuum,
press the Empty button on the front of the dust cup.
To remove the dust cup from the handheld vacuum,
press the two
Dust Cup Release
buttons at the
same time and slide out the dust cup. Hold the dust
cup over the trash and press the
Empty
button to
open the lid and release debris. Close the dust cup
lid. Reinstall it in the handheld vacuum by inserting
the front end first, then the back.
Regularly rinse and replace the filters to maintain your vacuum's suction power.
IMPORTANT:
To prevent damage, rinse filters with water
ONLY
.
DO NOT
use soap. Allow filters to air-dry for
at least 24 hours before reinstalling them to prevent liquid from being drawn into electric parts.
Empty the dust cup each time you vacuum and periodically during cleaning, when debris in the dust cup
reaches the MAX fill line.
MAINTENANCE
CLEANING FILTERS
IMPORTANT:
Unplug the vacuum before performing any maintenance.
IMPORTANT:
Unplug the vacuum before performing any maintenance.
NOTE:
The pre-motor filters should be
replaced every 2.5 years. The post-motor filter
should be replaced every 3 years.
PRE-MOTOR FILTERS
POST-MOTOR FILTER
Replacement Pre-Motor Filter Kit
XPMFK320
Replacement Post-Motor Filter
XPSTFH380
REPLACEMENT FILTERS
OR
The
Pre-Motor Filters
should be washed
once a month.
To remove the pre-motor filters, lift the latch
on top of the handheld vacuum and take off
the filter cover. Pull out the foam filter, then
the felt filter.
Rinse filters with water and allow them to
air-dry completely before reinstalling them.
Reinsert the felt filter, then the foam filter,
then reattach the cover.
The
Post-Motor Filter
should be washed
once every 9 months.
Remove the filter cover under the handle
of the handheld vacuum to access the
post-motor filter.
