CARPET AVOIDANCE
NO-GO ZONES
WHAT TO EXPECT
Once the robot has mapped your home, you can use
the app to identify carpets and rugs on the map so
the robot can avoid them when it mops. If there are
rugs blocking your robot’s path to another room,
you may need to move them.
Create no-go zones in the app to keep your robot
out of the areas you would like it to avoid:
• Near power cords or phone chargers.
• In front of high thresholds.
AVOID MOVING THE ROBOT OR DOCK
EMPTYING THE DUSTBIN
GETTING THE MOST OUT OF YOUR ROBOT
While your robot is cleaning, do not pick it up and
move it, or move the charging dock—this will impact
the robot’s ability to map your home.
During the first few weeks of use, the dustbin will
need to be emptied more frequently, as the robot
cleans areas that were previously hard to reach.
Empty debris and dust into the bin. Remove any
debris between the filter and the plastic shield.
INTERACTIVE MAP
SCHEDULING
After completing the Explore Run, the robot will create
an interactive map in the app, where you can create
rooms and set up no-go zones.
To get the best experience, download the SharkClean app and follow the tips below.
Note:
BotBoundary strips can be used to physically block off areas and are available for purchase at
sharkclean.eu
.
For a constant state of clean, set up a whole-home
cleaning schedule in the app.
GETTING TO KNOW YOUR SHARK® AI ROBOT VACMOP
Clean Button
Front Bumper
Fluid Reservoir
Error Indicator Light
Charge Indicator Lights
Wi-Fi Indicator Light
Cliff and Boundary Sensors
Charging Contact
Side Brush
Battery Door
Anti Hair Wrap
Brush-roll
Drive Wheel
Dustbin and Filter
Front Caster
Wheel
Dock Button
Mopping
Indicator Light
Power Button
Brush-roll Door
ENGLISH
