4
“BOOST” Mandatory Operations:
1) If with correct connection between Jump Starter and vehicle battery (Red LED
keeps on and green LED is off), press and hold BOOST button for 3 seconds (after
a buzzer sound, the green LED is on and red LED is off). Usually this is because
the vehicle battery capacity is rather low.
2) Start the engine (same method as the normal operations in Page 6).
Cautions:
1) Under normal circumstances, do not use the mandatory operations.
2) The spark proof, reverse polarity protection and short circuit protection features
are disabled after Boost button is pressed. Pay very close attention to the polarity
of the battery before using this mode. Do not allow the positive and negative
battery clamps to touch or connect to each other as the item will generate sparks
EC5 Plug
Positive Clamp
Negative Clamp
BOOST Button
Red LED
