Bring up the lower thread
1.Raise the presser foot , hold the upper thread with the left hand ,turn
the handwheel anticlockwise until the needle is raised.
2.Pull on the upper thread to bring the lower thread up, pull both thread
to the back under the presser foot, pull out 10cm.
Reverse sewing
At the end of seam,press down
reverse sewing lever ,sew a few
reverse stitches ,fix the trace to
avoid loosing. The reverse trace
shouldn’t beyond 5cm.
Release the lever and the machine
will sew forward again.
8
Removing the fabric
1. Turn the handwheel towards to bring
the thread take up lever to its highest
position, raise the presser foot.
2. Push thread tension release bar to left
and remove fabric toward back.
Threading the upper thread
1.Take the thread through the guide from right to left.
2.Push thread tension release bar to left, then guide the thread down
between the tension disc making sure that the thread has been inserted
into the tension disc.
3.Continue to draw the thread down ,and around the thread pulling bar
fixed holder spring from left to right.
4.Draw the thread up, around the take-up lever draw from left to right.
5.Continue to draw the thread down through the upper guide from front
to back.
6.Drawing down the thread and through the lower guide from back to front.
7.Finally thread the needle from front to back.
1
2
3
4
5
7
2
4
3
7
6
5
6
7
