Shark 2400WD Series, Instructions Manual

Page: 4 / 12

sharkclean .com
DOCK SETUP
INSTALLING THE SIDE BRUSH
Snap the included Side Brush onto the square peg
on the bottom of the robot.
NOTE:
Side brush design may vary.
5 ft.
3 ft.
3 ft.
• Select a permanent location with strong Wi-Fi for the Charging Dock , because every time you relocate it,
your robot will have to completely re-map your house.
• Place the dock with its back against a wall and attach the landing mat. Select a level surface on bare floor,
in a central area. Do not place dock against baseboards or heating elements.
• Remove any objects that are closer than 3 feet from either side of the dock, or closer than 5 feet from the
front of the dock.
• Plug in the dock. The indicator light will illuminate green when the dock has power.