21
Operations
Shutting Down And
Clean-Up
STEP 1:
Remove detergent suction
tube from container and insert into
1 gallon of fresh water. Turn
variable pressure wand handle for
low pressure or connect the black
detergent nozzle. Pull trigger on
spray gun and siphon water for one
minute.
STEP 4:
Turn garden hose water
off. Open the spray gun to relieve
remaining pressure.
STEP 2:
Turn burner switch off and
continue spraying water, allowing
the water to cool. After water has
cooled to less than 100°F, turn off
engine. Protect from freezing.
STEP 5:
Lock trigger gun safety
lever to prevent unintentional
pulling of trigger.
STEP 3:
Turn off water supply.
Shark SMT Operator’s Manual 9.800-504.0 - E
SenDEC
TA
CH/HOU
R
1/10
Rinsing
It will take a few seconds for the detergent to clear.
Apply safety latch to spray gun. Remove black soap
nozzle from the quick coupler. Select and install the
desired high pressure nozzle. NOTE: You can also
stop detergent from flowing by simply removing
detergent siphon tube from bottle.