Shark Pressure Washers STP-201507D Operator'S Manual Download Page 3

Page: 3 / 26

v. 02/14B

PRESSURE W

ASHER

OPERA

OR’S MAN

ou for purchasing this Pressure Washer.

We reserve the right to make changes at any time
without incurring any obligation.

Owner/User Responsibility:

The owner and/or user must have an understanding of
the manufacturer’s operating instructions and warnings
before using this pressure washer. Warning information
should be emphasized and understood. If the operator
is not fluent in English, the manufacturer’s instructions
and warnings shall be read to and discussed with
the operator in the operator’s native language by the
purchaser/owner, making sure that the operator com-
prehends its contents.

Owner and/or user must study and maintain for future
reference the manufacturers’ instructions.

The operator must know how to stop the machine
quickly and understand the operation of all controls.
Never permit anyone to operate the engine without
proper instructions.

SAVE THESE INSTRUCTIONS

This manual should be considered a permanent
part of the machine and should remain with it if
machine is resold.

When ordering parts, please specify model and
serial number. Use only identical replacement parts.

This machine is to be used only by trained operators.

IMPORTANT SAFETY

INFORMATION

TOR’S

MANUAL THOROUGHLY

PRIOR TO USE.

WARNING: To reduce the risk of
injury, read operating instruc-
tions carefully before using.

1. Read the owner's manual

thoroughly. Failure to fol-
low instructions could cause
malfunction of the machine
and result in death, serious
bodily injury and/or property
damage.

2. Know how to stop the machine and bleed pressure

quickly. Be thoroughly familiar with the controls.

3. Stay alert — watch what you are doing.

4. All installations must comply with local codes.

Contact your electrician, plumber, utility company
or the selling distributor for specifi c details. If your
machine is rated 250 volts or less, single phase will
be provided with a ground fault circuit interrupter
(GFCI). If rated more than 250 volts, or more than
single phase this product should only be connected
to a power supply receptacle protected by a GFCI.

INTRODUCTION & IMPORTANT SAFETY INFORMATION

DANGER: Improper connection of the equipment-
grounding conductor can result in a risk of elec-
trocution. Check with a qualified electrician or
service personnel if you are in doubt as to whether
the outlet is properly grounded. Do not modify the
plug provided with the product - if it will not fi t the
outlet, have a proper outlet installed by a qualifi ed
electrician. Do not use any type of adaptor with
this product

WARNING

ATER

SPRAY AWAY FROM

ELECTRICAL WIRING.

ARNING: Keep wand, hose, and

water spray away from electric
wiring or fatal electric shock may
result.

To protect the operator from

electrical shock, the machine

must be electrically grounded.

It is the responsibility of the

owner to connect this machine

to a UL grounded receptacle of proper voltage and
amperage ratings. Do not spray water on or near
electrical components. Do not touch machine with
wet hands or while standing in water. Always dis-
connect power before servicing.

!"K

OPERATE ONLY WHERE

OPEN FLAME OR TORCH

IS PERMITTED

WARNING

ARNING: Flammable liquids

can create fumes which can ig-
nite, causing property damage
or severe injury.

WARNING: Risk of explosion
Operate only where open fl ame
or torch is permitted.

6. In oil burning models, use only kerosene, No. 1

home heating fuel, or diesel. If diesel is used, add
a soot remover to every tankful.

RISK OF FIRE.

DO NOT ADD FUEL
WHEN OPERATING